488414
22
Zoom out
Zoom in
Previous page
1/105
Next page
Use and care:
- Fully unroll the appliance’s power cable
before each use.
- Do not use the appliance if the parts or
accessories are not properly tted.
- Do not use the appliance if it is empty.
- Do not use the appliance if the on/off switch
does not work.
- Do not turn the appliance over while it is in
use or connected to the mains.
- Do not overload the appliance’s weight
capacity.
- Disconnect the appliance from the mains
when not in use and before undertaking any
cleaning task
- This appliance is for household use only, not
professional, industrial use.
- This appliance is intended for adult use.
Ensure that this product is not used by the
disabled, children or people unused to its
handling.
-During emptying and cleaning the jar, take
care on handling the sharp cutting blades.
- This appliance is not a toy. Children should
be supervised to ensure that they do not play
with the appliance.
- This appliance should be stored out of reach
of children and/or the disabled.
- Keep the appliance in good condition. Check
that the moving parts are not misaligned or
jammed and make sure there are no broken
parts or anomalies that may prevent the
appliance from operating correctly.
- Never leave the appliance connected and
unattended if is not in use. This saves energy
and prolongs the life of the appliance.
-Do not forget to place the sealing ring on the
blade unit . Otherwise, leakage may occur.
-Do not run the jar blender for more than 2
minutes at a time. Do not run the mill for more
than 20 seconds at a time (*). If the motor unit
is overheated, switch off and cool down the
appliance before you let it run again.
-This product is not designed to cater hot
liquid. Please do not mix hot liquid in the jar
blender.
-To crush ice cubes, put no more than 4 ice
cubes at one time. If you wish to add more
ice, pull out the measuring cup and insert the
ice cubes consecutively.
Instructions for use
Use:
-Fit the jar onto the motor body.
-Put the ingredients, after having rst chopped
them into small piece, into the jar with liquid
(do not exceed the maximum marker)
-Put the measuring cup in the lid.
-Put the lid on the jar, make sure it is properly
xed in place.
-Ensure the blade xing ring is xed properly
to the jar (by turning counter clockwise)
before putting on the motor body. (Fig.1)
-Place the jar onto to the motor unit, turn
clockwise until the lock clicks into place.
(Fig.2)
-Connect the appliance to the mains.
- Choose desired speed and start blending.
-If you wish to add more ingredients pull out
the measuring cup
-Add the ingredients and replace the
measuring cup.
-To stop the appliance set the speed back
to “0”.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Taurus Optima at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Taurus Optima in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info