Manual Taurus Hexa Striker Robot (page 9 of 36) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

586126

9

Zoom out

Zoom in

Previous page

1/36

Next page

- Put the battery in its compartment, respecting the polarity (Fig. 1)

- Close the cover of the battery compartment.

Assembling the side brushes:

- Place the side brush on the side brushes holder.

- Press until you hear a click. (Fig.2)

Instructions for use

Before use:

- Before using this product for the rst time, it is important to make a full charge

of batteries.

Use:

- Once the battery is charged, Turn the appliance on using the on/off switch.

- The appliance will begin to function automatically until its batteries run out.

- While the appliance is operating the battery charging/battery charged and

battery low indicator lamps will alternate.

- When the batteries are low, the red battery low indicator lamp will light up.

- When the deposit is full, the full deposit indicator lamp will come on and the

deposit must be emptied.

Once you have nished using the appliance:

- Turn the appliance off, using the on/off switch.

Cleaning

- Disconnect the appliance from the mains and let it cool before undertaking

any cleaning task.

- Disconnect the charger from the mains and let it cool before undertaking any

cleaning task.

- Remove the battery before starting any cleaning operation.

- Clean the equipment with a damp cloth with a few drops of washing-up liquid

and then dry.

- Do not use solvents, or products with an acid or base pH such as bleach, or

abrasive products, for cleaning the appliance.

- Do not let water or any other liquid get into the air vents to avoid damage to

the inner parts of the appliance.

- Do not submerge the appliance in water or any other liquid, or place it under

a running tap.

- Never submerge the connector in water or any other liquid or place it under

running water.

Emptying the dust box:

- Empty the dust box each time after use.

- Open the lid of the dust box. (Fig.3)

Disconnect the dust box from the appliance.

- Open the dust box emptying lid and empty its contents into a suitable rubbish

bin (Fig.4)

- Check the condition of the dust box lter and replace it.

- Close the lid of the dust box.

- Attach the dust box to the appliance.

Changing the lters:

- It is recommended that the dust box lter should be changed every three

months.

- To remove lters:

- Open the lid of the dust box. (Fig. 5)

- Disconnect the dust box from the appliance.

- Open the dust box emptying lid and remove the dust box lter from its bracket.

(Fig.6)

- To reassemble the lter, proceed with the above instructions, in reverse order.

Changing side brushes:

- To remove the side brushes

- Pull the bristles of the brush until it disengages from the side brush assembly.

- To install side brushes, proceed with the above instructions in reverse order.

Supplies:

- Supplies can be acquired from distributors and authorised establishments

(such as lters, etc. ) for your appliance model.

- Always use original supplies, designed specically for your appliance model.

Anomalies and repair

- Take the appliance to an authorised technical support service if problems

arise. Do not try to dismantle or repair without assistance, as this may be

dangerous.

For EU product versions and/or in the case that it is requested in your country:

Ecology and recyclability of the product

- The materials of which the packaging of this appliance consists are included in

a collection, classication and recycling system. Should you wish to dispose of

them, use the appropriate public recycling bins for each type of material.

The product does not contain concentrations of substances that could be

considered harmful to the environment

- This symbol means that in case you wish to dispose of the

product once its working life has ended, take it to an authorised

waste agent for the selective collection of waste electrical and

electronic equipment (WEEE)

This symbol means that the product may include a battery or

batteries; the user must remove them before disposing of the

product. Remember that batteries must be disposed of in duly

authorised containers. Do not dispose of them in re.

How to remove the batteries from the interior of the device:

It is important that the batteries are fully discharged prior to its withdrawal from

the apparatus.

To remove the batteries, once the life of the appliance, proceed as follows:

- Remove the cover of the battery compartment.

- Remove the battery from its casing.

- Close the cover of the battery compartment.

This appliance complies with Directive 2006/95/EC on Low Voltage and Directi-

ve 2004/108/EC on Electromagnetic Compatibility.

Manual Robot Quoin.indb 9 04/02/14 13:11

1

Trash - how to remove trapped trash from inside the Taurus Hexa Striker Submitted on 4-6-2023 at 13:31
Reply Report abuse
Taurus Hexa fully charged brand new stops working all the time. Runs for minute Submitted on 31-5-2020 at 10:47
Reply Report abuse
What is the charging time, for the Taurus Hexa Striker Submitted on 28-2-2020 at 10:47
Reply Report abuse
Hi. I opened up my Taurus Hexa centre wheel part to remove all the hair it sucked and now I cant remember how to put everything back together. Please help me. Submitted on 9-2-2020 at 18:35
Reply Report abuse
The worst buy ever. It keeps just stopping. Shuts down. I clean out all but then it just runs for a short while again. VERY dissatisfied. Am i doing somethings wrong? Submitted on 10-3-2019 at 07:30
Reply Report abuse
Good afternoon

Our Hexa striker is not going on and the blue light flashes. What can cause this problem? Submitted on 5-5-2018 at 16:01
Reply Report abuse
- Did you sort out problem Answered on 9-11-2020 at 17:07
  Vote up (4) Report abuse
My Taurus makes a ticking sound when it hits something and turns. Submitted on 6-4-2018 at 17:10
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Taurus Hexa Striker Robot at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Taurus Hexa Striker Robot in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info