729647
12
Zoom out
Zoom in
Previous page
1/68
Next page
ASSEMBLING THE BASE (DESK FAN):
- To x the base into the appliance, place the
appliance face down.
- Fit the base on the main body of the appliance.
- Fix the base using the screws provided (M).
- Stand the appliance up again so as to check
that the base works properly.
FITTING THE BASE FEET (CROSS BASE
STAND FAN):
- The appliance has anti-slip base feet (V) that
support the product.
- Position the base feet on the body of the
appliance.
- Position the base feet on the body of the
appliance using the screws (Fig.1).
FITTING THE BASE (ROUND BASE STAND
FAN):
- The appliance has anti-slip base (U) that sup-
port the product.
- To assemble the base, place the appliance
face down.
- Position the base feet on the body of the
appliance.
- Position the base on the body of the appliance
using the screws (Fig.2).
- Stand the appliance up again so as to check
that the base work properly.
ASSEMBLING THE GRILL AND THE
PROPELLER:
- Fit the rear grill (G) on the motor housing (I),
matching their tting points.
- Tight the grill nut (F) that attaches the grill,
Make sure of a correct setting.
- Fit the propeller (E) On the motor shaft (H).
- Tight the nut (D) that attaches the propeller,
Make sure of a correct setting.
- Fit the front grill (C) front the rear grill (G), mat-
ching the security screw position. Fix the front
grill turning around its xing belt (A) and tight
the security screw (B) by using a screwdriver.
- Check the correct rotation of the propeller.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all products’ packaging has
been removed.
USE:
- Unroll the cable completely before plugging it
in.
- Connect the appliance to the mains.
- Guide the appliance to direct the ow of air in
the desired direction.
- Turn the appliance on, by using one of the
speed selection buttons.
OSCILLATION FUNCTION:
- The oscillation function makes it possible to
direct the ow from the apparatus so that it
automatically alternates over a range of 75º.
- To activate this function, press the (J) switch.
- To deactivate this function, follow the procedu-
re for switching it on in reverse.
HEIGHT ADJUSTMENT
- The appliance height can be adjusted, it’s just
necessary to unlock the knob (Q) place the
appliance at the desired height and lock again
the knob (Q).
CARRY HANDLE/S:
- This appliance has a handle on the upper part
of the body, which facilitates comfortable trans-
portation (Fig.3).
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Stop the appliance, selecting position 0 on the
selector control.
- Unplug the appliance from the mains.
- Clean the appliance.
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Taurus GRECO16CR ELEGANCE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Taurus GRECO16CR ELEGANCE in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 3,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info