585900
16
Zoom out
Zoom in
Previous page
1/72
Next page
- The water fill-up opening must
not be left open while the iron is
being used.
- Never leave the appliance unat-
tended while in use.
- Never leave the appliance
connected and unattended if is
not in use. This saves energy and
prolongs the life of the appliance.
- Never rest the appliance into a
surface while in use.
- Do not use the appliance on any
part of the body of a person or
animal.
- Do not use the appliance to dry
textiles of any kind.
- CAUTION: Do not sleep while
using this appliance, as there is
risk you could be harmed.
- Turn the thermostat control to
the minimum (MIN) setting. This
does not mean that the iron is
switched off permanently.
Service:
- Make sure that the appliance
is serviced only by specialist
personnel, and that only original
spare parts or accessories are
used to replace existing parts/
accessories.
- Any misuse or failure to fo-
llow the instructions for use
renders the guarantee and the
manufacturer’s liability null and
void.
Instructions for use
Before use:
- Remove the appliance’s protective film.
- Make sure that all the product’s packaging has been
removed.
- Some parts of the appliance have been lightly greased.
Consequently, the first time the appliance is used a light
smoke may be detected.
- Prepare the appliance according to the function you
wish to use.
Filling with water:
- It is essential to have filled the deposit with water to be
able to work with steam.
- Open the lid of the filling mouth.
- Fill the deposit taking care to observe the MAX level
(Fig. 1)
- Close the lid of the filling mouth.
Use:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Turn the thermostat control to the desired temperature
position.
- Do not use temperatures higher than those indicated on
the garments to be treated.
• Temperature for synthetic fibres (Polyester, Nylon…).
• • Temperature for silk, wool.
• • • Temperature for cotton. (Minimum temperature for
steam ironing)
Max Temperature for linen.
- If garment has various kinds of fibres, select the tempe-
rature for the fibre that requires the lowest temperature.
(For example, select the temperature for polyester for an
article made out of 60% polyester and 40% cotton).
- Wait until the pilot light (F) has gone out which will
indicate that the appliance has reached an adequate
temperature.
- During use the pilot light (F) will automatically flash
on and off, thus indicating that the heating elements are
operating in order to maintain the desired temperature.
Dry ironing:
- The appliance has a steam flow regulator that permits
dry ironing (without steam) when placed in the 0 posi-
tion.
Steam Ironing:
- It is possible to iron with steam whenever the deposit
is filled with water and the adequate temperature is
selected.
Steam flow control:
- The appliance has a (C) control knob that allows to get
the control of the steam flow.
Spray:
- The spray can be used in both steam and dry ironing.
- Press the spray button ( A ) to use this operation.
- The spray button has to be pressed repeatedly to release
the first spray.
Manual Geysers.indb 16 26/06/12 16:17
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Taurus Geyser Titanium 2600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Taurus Geyser Titanium 2600 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info