488360
13
Zoom out
Zoom in
Previous page
1/60
Next page
Use and care:
- Do not use the appliance if the on/off
switch does not work.
- Do not move the appliance while in use.
- Do not use the appliance if it is tipped up
and do not turn it over.
- Disconnect the appliance from the mains
when not in use and before undertaking any
cleaning task.
- Always leave the upper support platform
in position “0” after use, and before any
cleaning operation.
- This appliance is for household use only,
not professional or industrial use.
- This appliance is not a toy. Children
should be supervised to ensure that they do
not play with the appliance.
- This appliance is intended for adult use.
Ensure that this product is not used by the
disabled, children or people unused to its
handling.
- This appliance should be stored out of
reach of children and/or the disabled.
- Keep the appliance in good condition.
Check that the moving parts are not
misaligned or jammed and make sure
there are no broken parts or anomalies that
may prevent the appliance from operating
correctly.
- Keep the cutting tools sharp and clean.
- To push the food item, always use the
food pusher. Never use your fingers or
other accessories.
- Never leave the appliance unattended
while in use.
- Do not use the appliance for more than 10
minutes at any one time. Allow to cool for
one hour before subsequent use.
- Do not use the appliance with frozen
goods or those containing bones.
- Pay special attention during the assembly
and disassembly of blades, as they are
sharp and could cause harm.
- This appliance must be used with the
sliding feed table and the piece holder in
position unless this is not possible due to
the size or shape of the food.
- Any misuse or failure to follow the
instructions for use renders the guarantee
and the manufacturer’s liability null and
void.
Instructions for use
- Connect the appliance to the mains.
- Place the food item on the lower support
platform and fix the food pusher, which will
hold the food item in place. (Fig. 1)
- Adjust the thickness of the slice using the
thickness control dial. (Fig. 2)
- Switch the appliance on using the on/off
button.
- Using the food pusher slide the food item
towards the blade. (Fig. 1)
Once you have finished using the
appliance:
- Unplug the appliance from the mains.
- Clean the appliance.
Cleaning
- Disconnect the appliance from the mains
and allow it to cool before undertaking any
cleaning task.
- Clean the equipment with a damp cloth
with a few drops of washing-up liquid and
Manual Cutmaster.indd 13 17.06.08 14:16:09
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Taurus Cutmaster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Taurus Cutmaster in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info