Manual Taurus CUTMASTER COMPACT (page 8 of 36) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

729508

Zoom out

Zoom in

1/36

FINISHED USING THE APPLIANCE:

- Stop the appliance by releasing the pressure

on the buttons.

- Unplug the appliance from the mains.

- Clean the appliance.

CLEANING

- Disconnect the appliance from the mains and

allow it to cool before undertaking any cleaning

task.

- Clean the equipment with a damp cloth with a

few drops of washing-up liquid and then dry.

- Do not use solvents, or products with an acid or

base pH such as bleach, or abrasive products,

for cleaning the appliance.

- Do not let water or any other liquid get into the

air vents to avoid damage to the inner parts of

the appliance.

- Never submerge the appliance in water or any

other liquid or place it under running water.

- During the cleaning process, take special care

with the blades, as they are very sharp.

- It is advisable to clean the appliance regularly

and remove any food remains.

- If the appliance is not in good condition of

cleanliness, its surface may degrade and

inexorably affect the duration of the appliance’s

useful life and could become unsafe to use.

- Neither parts of this appliance are suitable for

cleaning in the dishwasher.

- The following pieces may be washed in hot

soapy water:

- Shield – pusher.

- Foldable platform.

- To remove the platform, fold the platform and

extract by pulling the bottom left-hand.

- The cutting guide can be removed to clean by

turning the regulator counterclockwise.

- The blade, sliding carriage and body can be

cleaned with a slightly moistened cloth.

- Then dry all parts before its assembly and

storage.

- To place the platform, rst t on the right side

and then press on the left side.

- From time to time it is convenient to remove the

blade for a more through cleaning. To do so,

turn the axle of the blade to the right about 90º

and take it out with care.

- With a soft sponge or cloth, clean both sides of

the blade with soap and water. Rinse and dry

the blade.

- To replace the blade, place it back into position,

hold the tab and align the blade with the trans-

mission gears until it ts snugly. Turn tab in the

opposite direction to tighten the blade.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Taurus CUTMASTER COMPACT in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Taurus CUTMASTER COMPACT Manual

Product: