Manual Taurus ConTact 2500 (page 18 of 80) (English, German, Dutch, French, Italian, Portuguese, Spanish)

488358

18

Zoom out

Zoom in

Previous page

1/80

Next page

cotton and linen, it is recommended

to put the iron base in contact with

the material. For other more delicate

ﬁbres, it’s recommended to keep

the iron base at some centimetres of

distance.

Contact System

The Contact System function discon-

nects the appliance when its handle

is not being touched. This system

increases safety and energy saving.

The function will be deactivated

during the ﬁrst few minutes after

plugging in your appliance, while it

heats up and reaches the selected

operating temperature.

If the handle is not touched for 1

minute, the Contact System pilot

light will start to ﬂash on and off,

indicating that the appliance is about

to switch off.

If you touch the handle again, the

appliance will switch on and heat up

again, and the Contact System pilot

light will cease to ﬂash on and off

and will be continuously lit up.

Once you have ﬁnished using the

appliance:

- Select the minimum position (MIN)

using the thermostat control.

- Unplug the appliance to the mains.

- Remove the water from the water

tank.

- Clean the appliance

Cleaning

Disconnect the appliance from the

mains and let it cool before underta-

king any cleaning task.

- Clean the equipment with a damp

cloth with a few drops of washing-up

liquid and then dry.

- Do not use solvents, or products

with an acid or base pH such as blea-

ch, or abrasive products, for cleaning

the appliance.

- Do not submerge the appliance in

water or any other liquid, or place it

under a running tap.

Self-cleaning function:

- It is important to self-clean the

appliance at least once a month to

remove calcium and any other built-

up minerals inside the iron.

- Fill the depository to its maximum

level, as indicated on “water ﬁll”

section.

- Place the iron in a vertical position,

plug in to the mains m and select the

maximum temperature.

- Leave the appliance to heat up until

the pilot light indicates that it has

reached its consigned temperature.

- Unplug the appliance and place in

the sink.

- Press the self-clean button, and

keep it pressed down.

- Let the water ﬂow out through the

steam vents in the base, while lightly

shaking the appliance.

- Release the button after a minute or

when the tank becomes empty.

- Leave the iron in the vertical posi-

tion until it has cooled.

Manual Con-Tact.indb 18 02/03/12 9:54

1

Hello, I was looking at the blog articles on your website, and I noticed that they are very well written and informative. However, I believe that my team and I can contribute to your feed and make it even more engaging and helpful to your readers. We write entirely unique and SEO-optimized articles, and best of all, they are absolutely free of charge. If you are interested, please let me know. Jassica Mendez Submitted on 11-1-2022 at 18:53
Reply Report abuse
Hello, I was looking at the blog articles on your website, and I noticed that they are very well written and informative. However, I believe that my team and I can contribute to your feed and make it even more engaging and helpful to your readers. We write entirely unique and SEO-optimized articles, and best of all, they are absolutely free of charge. If you are interested, please let me know. Levana Tyson Submitted on 5-1-2022 at 17:20
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Taurus ConTact 2500 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Taurus ConTact 2500 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info