586106
20
Zoom out
Zoom in
Previous page
1/100
Next page
guarantee and the manufacturer’s
liability null and void.
Installation
- Be sure to remove all packaging
material from inside the appliance.
- Respect the legal provisions con-
cerning safety distances from other
elements such as pipes, electrical
connections, etc.
- Ensure that the appliance is level
with respect to the floor.
- The appliance requires suitable
ventilation in order to work properly.
Leave a space of 15 cm between
walls or other obstacles and 20cm
from the floor. (Fig 2)
- Do not cover or obstruct any of the
openings of the appliance.
- Do not cover or obstruct the sides
of the appliance, leave a minimum
space of 2cm around the appliance.
- To achieve the highest efficiency
from the appliance and so as to be
able to install the appliance on a
cold wall (an exterior wall) and below
a window. But never obstructing or
covering a ventilation area.
- The appliance should work well with
its wall support attached or with its
base/feet attached.
Assembling the wall bracket:
- The appliance has a wall support (J)
to support the product.
- Fix the wall support as you think
appropriate, using plugs.
- Taking into account the separation
distances mentioned above, place the
wall support in the required position
and mark the drilling points on the
wall (fig 1).
- Drill on the marks and introduce the
plugs (fig 2).
- Fit the support, lining up its holes
with those of the plugs, and screw on
(Fig. 3).
- Make sure that the bracket is firmly
fixed; it should be able to support twi-
ce the weight of the appliance.
- Fit the appliance into the wall
support.
Fitting the base feet
- The appliance has some base feet
(I) on which the product can be
supported.
- To assemble the base feet, place the
appliance face down.
- Position the base feet on the body
of the appliance using the screws (K)
(provided with the appliance)
- Stand the appliance up again so
as to check that the base feet work
properly.
Instructions for use
Before use:
- Make sure that all the product’s
packaging has been removed.
Use:
- Unroll the cable completely before
plugging it in.
- Connect the appliance to the mains.
- Turn the appliance on using the on/
off switch.
The transmitter comes on, going into
stand-by mode.
- The ambient temperature will
appear in the screen.
Press the operation/stand-by button
to turn the appliance on.
Manual Cairo Slim.indb 20 25/06/12 16:00
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Taurus Cairo Slim 1250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Taurus Cairo Slim 1250 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Spanish as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info