approximately 500ml of water and
empty a packet of anti lime-scale
solution Taurus Decal.
- Connect the appliance (with the iron
selected at maximum steam) and wait
20 minutes in order for the anti lime-
scale liquid begin to take effect.
- Let the steam out of the iron (in a
suitable place, for example the sink)
and leave it until the water in the
deposit has drained out.
- Unplug and let the appliance cool
down (for at least three hours).
- Empty and rinse out the water
deposit.
- Open the detachable water heater
again and use a funnel to rinse it
out with cold water and then drain
completely. Repeat the operation to
close the detachable heater stopper
(L), following the reverse process to
when it was opened. Place the lid
on (K).
- The first time that the appliance is
used after cleaning the detachable
water heater, let some steam off
before ironing. There is a possibility
that it contains residue of anti lime-
scale products.
Anomalies and repair
- Take the appliance to an authorised
technical support service if problems
arise. Do not try to dismantle or
repair without assistance, as this may
be dangerous.
- If the connection to the mains has
been damaged, it must be replaced
and you should proceed as you would
in the case of damage.
If any anomalies are detected,
consult the following table:
