Manual Taurus Aquapower (page 19 of 88) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

488325

Zoom out

Zoom in

1/88

plugging it in.

- Ensure that the electronic connector

is properly attached to the appliance.

- Connect the appliance to the mains.

- Turn the appliance on, by using the

on/off button.

- The LED display will show the re-

maining percentage of battery power

charge.

- Select the desired cutting height

using the comb height selector (H).

Press it and adjust the height accor-

ding to the desired cutting length.

How to cut the hair:

- Situate the person whose hair you

are going to cut so that the top of

their head is at your eye level. Place

a protective towel or cloth around

their neck.

- To obtain best results is better to

use the appliance on dry hair, as it is

much easier to control the hair and

the result.

- Comb hair well before cutting.

Make sure that there are no tangles

or knots.

- Hold the appliance in a calm and

relaxed manner in order to ensure

maximum control of the cut and a

uniform result. Proceed to use short

cuts gradually going around the head.

- Leave the hair a little longer than

desired length as it can always be

altered later.

- While working adapt the comb /

comb guide to the desired result

- At regular intervals, stop cutting in

order to comb the hair and check the

results so far.

Step 1 Nape:

- Attach comb guide size 4-16mm (E)

- Hold the appliance with the razor

facing downwards and begin to cut

the hair from the base of the neck.

- Make some upward movements,

raising the appliance gradually and

away from the head, cutting the hair

gradually until the height of the ears

(Fig 3)

Step 2 The back of the head:

- Attach comb guide size 18-30mm

(F) and continue with the back of the

head (Fig 4)

Step 3 The side of the head:

- Attach a new shorter comb guide size

4-16mm (E) to trim the sideburns.

- Attach the longest comb guide size

16-30 (F) again and continue until

you reach the top of the head.

Step 4 The top of the head:

- Using comb guide size 4-16mm

(E), pass the appliance from the

back to the front, against the growth

of the hair (Fig 5). In some cases

it’s necessary to go over what you

have done a second time from front

to back.

- The comb guide size 4-16mm (E) is

for when you want to achieve a more

precise cut.

- Use comb guides size 18-30mm

(F) to leave hair at a longer length.

Hold the hair up with the comb or the

comb and your ﬁngers and cut.

- Always work from the back to the

front reducing the length between

your ﬁngers or the comb and the head

gradually.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Taurus Aquapower in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Taurus Aquapower Manual

Product: