587255
54
Zoom out
Zoom in
Previous page
1/68
Next page
Editing
Editing
Edit Tools
I-Beam Tool
The I-beam tool is used to select a portion of a recorded clip or clips. When the I-beam tool
is dragged through the middle of a clip, only that section will be edited. For example, if you
wanted to erase a cough in the middle of a recorded voiceover, the I-beam would allow you
to select just that cough and then hit delete on the keyboard. Double-clicking on a clip with
the I-beam tool selects the entire clip.
Mouse/Keyboard Operation (only)
Note: Editing is only possible using the keyboard and mouse – you can't edit tracks from the
front panel. So all of the instructions in this chapter refer to the mouse, keyboard and
monitor interface. These instructions also assume that you've selected the Tracks view at the
bottom of the screen or by pressing F1.
Click on the I-Beam button in the top-left corner of the screen (pictured above) or
press F9 on your keyboard.
Click and drag a portion or a complete clip in the timeline, or multiple clips across
multiple tracks. Any editing functions you perform (i.e. cut, copy, paste, delete) will
be applied only to the portion of the clip you selected and highlighted.
Object Tool
Press F8 to select the Object tool, or click the button pictured above in the top-left corner of
the screen. This tool does different things depending where your mouse is:
When it's not hovering over a clip, it looks like a cursor (+) sign. You can click and
drag over clips to select multiple objects. (It doesn't select only portions of clips like
the I-Beam).
When you mouse over the bottom left or bottom right corner of a clip, you get a tool
that looks like a horizontal line with arrowhead on either side. This tool allows you
to change the beginning or ending point of a clip. Drag the end point inward to
shorten a clip, or drag it back out to lengthen it (if there is any waveform there).
Mouse over the top left or top right corner, and the tool changes to a horizontal line
under a white arc. This is the fade tool, which allows you to add a fade-in or fade-
out to a clip. If clips on multiple tracks are selected, the fade-in or -out is changed on
all of those tracks.
Move to the middle of a clip, and your cursor changes into the finger tool. Click and
drag to move the clip (or multiple selected clips).
54
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam X-48 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam X-48 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info