587255
51
Zoom out
Zoom in
Previous page
1/68
Next page
Recorder
Front Panel Operation
• Press the SYNC button. Press the up/down buttons to select Chase Relock and
press CHNG.
Choose a setting from the list using the up/down buttons and press Enter.
Chase Relock Threshold
This parameter governs how far out of sync the X-48 can drift before the Chase Relock
feature forces it back in sync. (Or not, see previous section.) The range is 1/3 frame, 1
frame, 2 frames, 5 frames or 10 frames. If the timecode suddenly jumps outside of the
window set by the Timecode Freewheel parameter, playback or recording will stop. This
setting can only changed from the GUI interface.
Mouse/Keyboard Operation (only)
Click the Windows menu and select the Settings window.
Click on the Sync tab and click the Relock Threshold submenu. Choose a setting
from the list.
Timecode Offset
This offsets the transport from the incoming timecode. The offset can be either positive or
negative. To change the offset:
Mouse/Keyboard Operation
Click the Windows menu and select the Settings window.
Click on the Sync tab and click in the Time Code Offset field. Type a new offset with
the keyboard.
Front Panel Operation
• Press the SYNC button. Press the up/down buttons to select Chase Offset and
press CHNG.
• Use the CHNG and HOME buttons to cursor through the display. Use the up/down
buttons to change the offset. The Enter button saves your offset.
Chase Lock Deviation
Chase Lock Deviation displays the difference between incoming timecode and the X-48's
transport. It can be useful if you think that the machine is drifting out of sync or for
troubleshooting. There is no setting to change, it's only a display of how far out of sync the
machine is (ideally 0). To view this setting:
51
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam X-48 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam X-48 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info