587255
48
Zoom out
Zoom in
Previous page
1/68
Next page
Recorder
Click the Windows menu and select the Settings window.
Click on the Sync tab and click the BNC In or BNC Out submenu. Choose a setting
from the list.
Front Panel Operation
• Press the SYNC button. Press the up/down buttons to select BNC Clock In or
BNC Clock Out and press CHNG.
Use the up/down buttons to select a setting and press Enter.
BNC Word Clock Output Polarity
This setting allows the Word Clock signal output phase to be reversed. This may be
necessary in large systems or with long cable runs.
Mouse/Keyboard Operation
Click the Windows menu and select the Settings window.
Click on the Sync tab and check the box labeled Invert Word Out Polarity.
Front Panel Operation
• Press the SYNC button. Press the up/down buttons to select Word Out
Polarity and press CHNG.
Use the up/down buttons to select either Normal or Inverted and press Enter.
Video Clock Frame-Edge Resolve
Video Clock in the X-48 can be used to define the frame edge of incoming and generated
timecode for stability and repeatability. (But not as a sample clock source, see Requirements
above.) To enable video clock:
Mouse/Keyboard Operation
Click the Windows menu, select the Settings window and click the Sync tab.
Check the box labeled Resolve to Video In in the Time Code area.
Front Panel Operation
• Press the SYNC button. Press the up/down buttons to select Resolve to Video
In and press CHNG.
Press the Up/Down buttons to select On and press Enter.
Frame Rate
The X-48 syncs to any frame rate of SMPTE timecode:
48
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam X-48 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam X-48 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info