617917

Tascam SS-CDR200 Manual

80
Zoom out
Zoom in
Previous page
1/84
Next page
80 TASCAM SS-CDR200/SS-R200/SS-R100
If the unit is not functioning properly, please check the
following items before calling for service. If you are still
unable to resolve the problem please contact the retailer
where you purchased the unit or TASCAM customer
support.
8
Power does not turn on
Confirm that the power plug is inserted completely.
8
Media is not detected
•
Confirm that the USB/SD/CF media is inserted
completely.
•
Stop playback or recording once.
8
Unit cannot be controlled from the front
panel
Confirm that the panel lock function is not on.
8
Unable to playback a file
If it is a WAV file, confirm that it uses a sampling frequency
(44.1 kHz or 48 kHz) and a bit rate (16/24-bit) that are
supported by this unit. If it is an MP3 file, confirm that it
uses a bit rate that is supported by this unit.
8
No sound
Confirm the connections with the monitoring system and
check the volume of the amplifier.
8
Unable to record
•
Confirm the connections.
•
Adjust the recording level.
•
If the media does not have enough open space, erase
unneeded data to make more space or change the
media.
•
If the folder already contains a large number of entries
(the total number of files, folders and other items),
change the recording folder.
8
Changed settings are not saved
This unit backs-up settings whenever you change them.
This backup could fail if you turn OFF the power while
this data is being written, so do not turn OFF the power
immediately after changing a setting.
8
I hear noise
Check if any connecting cable might have a bad
connection.
8
When editing text, “Name Full” appears
Due to limitations of the system, a maximum of 255
characters (single-byte) can be used for items such as file
and folder names. Since this limitation applies to the full
path in the
FINDER
screen, the maximum name length
for items inside a folder are reduced by the number
of characters used by all the folders above it and any
separator characters.
16 − Troubleshooting
… 80 …


Need help? Post your question in this forum.

Forumrules
1

Forum

tascam-ss-cdr200

Reset search

  • Dear sir.
    I have problem on both tascam sscdr 200 on the time display that after doing the setting before the recording into the pendrive that after done the rec, it appears the wrong time of at what time it started the recording example i set it at 1am and it appears at 2am.
    Is there a way to resolve this?
    Same thing also in the sscdr250N Submitted on 30-10-2023 at 10:11

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam SS-CDR200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam SS-CDR200 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info