617918
81
Zoom out
Zoom in
Previous page
1/84
Next page
TASCAM SS-CDR200/SS-R200/SS-R100 81
Media and file formats
Recording media
USB memory (512MB – 64GB)
SD card (512MB – 2GB)
SDHC card (4GB – 32GB)
CF card (512MB – 128GB, Type I only)
CD-R, CD-R-DA, CD-RW, CD-RW-DA (12cm discs only, High
Speed CD-RW supported) (CDR200 model only)
Recording and playback file formats
MP3: 44.1/48kHz, 64/128/192/256/320kbps
WAV: 44.1/48kHz, 16/24-bit (24-bit playback only)
CD-DA: 44.1kHz, 16-bit
Number of channels
2-channel (stereo)
1-channel (mono)
Inputs and outputs
Analog audio inputs and outputs
ANALOG INPUTS (BALANCED)*
(SS-CDR200/SS-R200 only)
Connector: XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input impedance: 22 kΩ
Nominal input level: +4 dBu (1.23 Vrms)
Maximum input level: +20 dBu (7.75 Vrms)
Minimum input level: −6 dBu (0.39 Vrms) or more
(minimum input level adjustable to nominal level)
ANALOG INPUTS (UNBALANCED)
Connector: RCA pin jack
Input impedance: 22 kΩ
Nominal input level: −10 dBV (0.316 Vrms)
Maximum input level: +6 dBV (2.0 Vrms)
Minimum input level: −20 dBV (0.1 Vrms) or more
(minimum input level adjustable to nominal level)
ANALOG OUTPUTS (BALANCED)*
(SS-CDR200/SS-R200 only)
Connector: XLR-3-32 (1: GND, 2: HOT, 3: COLD)
Output impedance: 100 Ω
Nominal output level: +4 dBu (1.23 Vrms)
Maximum output level: +20 dBu (7.75 Vrms)
ANALOG OUTPUTS (UNBALANCED)
Connector: RCA pin jack
Output impedance: 200 Ω
Nominal output level: −10 dBV (0.316 Vrms)
Maximum output level: +6 dBV (2.0 Vrms)
*If you want to change the maximum balanced input and
output levels, please contact TASCAM customer support.
Digital audio inputs and outputs
DIGITAL IN JACK
Connector: RCA pin jack
Formats: IEC60958-3 (S/PDIF) and AES3-2003/IEC60958-4
(AES/EBU) detected automatically (AES3-2003/IEC60958-4
(AES/EBU) is a data format only; the physical format
conforms to IEC60958-3 (S/PDIF))
Supported input sampling frequencies: 32–48 kHz
DIGITAL OUT JACK
Connector: RCA pin jack
Formats: IEC60958-3 (S/PDIF) and AES3-2003/IEC60958-4
(AES/EBU) switchable (AES3-2003/IEC60958-4 (AES/EBU)
is a data format only; the physical format conforms to
IEC60958-3 (S/PDIF))
Control inputs and outputs
REMOTE JACK (for RC-3F and RC-20)
Connector: 2.5mm TRS jack
USB PORT
Connector: USB A-type 4-pin
Protocol: USB 2.0 HIGH SPEED (480 Mbps)
KEYBOARD
Connector: mini-DIN connector (PS/2)
REMOTE IN (RC-SS2)
Connector: 3.5mm TRS jack
RS-232C CONNECTOR (SS-CDR200/SS-R200 only)
Connector: 9-pin D-sub
CONTROL I/O PARALLEL (SS-CDR200/SS-R200 only)
Connector: D-sub 25-pin
Maximum input voltage: +5.5 V
High level minimum input voltage: +3.75 V
Low level maximum input voltage: +1.25 V
Output format: open drain (withstand voltage 50 V,
maximum 50 mA)
Low level maximum output voltage: 0.5 V
+5V power maximum supplied current: 100 mA
17 − Specifications
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam SS-CDR100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam SS-CDR100 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info