617918
47
Zoom out
Zoom in
Previous page
1/84
Next page
TASCAM SS-CDR200/SS-R200/SS-R100 47
7 Turn the MULTI JOG dial (or push remote control
5 and b buttons) to select one of the following
pause modes.
SAME TRK (default value)
No new track created when switching from recording
to recording standby
NEW TRAK
New track created when switching from recording to
recording standby.
8 When you have finished making the setting, press
the HOME/DISPLAY button (or remote control
HOME/DISP button) to return to the Home Screen.
NOTE
This setting cannot be changed when recording or in
recording standby.
The pause mode setting is retained even after the
power is turned OFF.
Using the compressor when recording
You can apply the built-in compressor to the recording
source while you record.
A compressor is an effect that lowers the level of loud
peaks and raises the level of quiet parts in the audio,
making the overall level more consistent and quieter
recorded sounds easier to hear.
Use the menu to turn the compressor ON/OFF.
1 Press the MENU [JOG] button (or remote control
MENU button) to open the
MENU
screen.
2 Open the
REC
menu.
3 Select
OTHERS
.
4 Press the MULTI JOG dial or , [LOCK] button (or
remote control ENTER or t button) to open the
REC OTHERS
screen.
5 Select
COMP
.
6 Press the MULTI JOG dial or , [LOCK] button (or
remote control ENTER or t button) to move the
cursor right to select the value.
7 Turn the MULTI JOG dial (or push remote control
5 and b buttons) to select one of the following
compressor modes.
OFF (default value)
The compressor is not used when recording.
SOFT
Light compression is applied when recording. This
setting is suitable when recording music.
HARD
Strong compression is applied. When the audio source
being recorded has a low volume, the recording
volume will be boosted significantly, making it suitable
when recording a meeting or conference.
8 When you have finished making the setting, press
the HOME/DISPLAY button (or remote control
HOME/DISP button) to return to the Home Screen.
NOTE
The compressor setting is retained even after the power is
turned OFF.
Setting the format for naming
recorded files (MP3/WAV files only)
You can specify the file name that is automatically given
to files when recorded. Use the menu to make this setting.
1 Press the MENU [JOG] button (or remote control
MENU button) to open the
MENU
screen.
2 Open the
REC
menu.
3 Select
OTHERS
.
4 Press the MULTI JOG dial or , [LOCK] button (or
remote control ENTER or t button) to open the
REC OTHERS
screen.
5 Select
WORD CLIP
.
6 Press the MULTI JOG dial or , [LOCK] button (or
remote control ENTER or t button) to move the
cursor right to select the value.
7 Turn the MULTI JOG dial (or push remote control 5
and b buttons) to select one of the following file
name formats.
DATE (default value)
The date of the built-in clock will become the file
name.
USER 01 – USER 03
A user-set text string (eight characters) will be used as
the file name.
8 If you selected one of the user options (
USER 01
USER 03
), press the MULTI JOG dial or , [LOCK]
button (or remote control ENTER or t button) to
open the
WORD CLIP
screen where you can edit the
name.
9 To edit the file name, follow the instructions in
“Inputting and editing characters” below.
5 – Recording
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam SS-CDR100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam SS-CDR100 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info