617918
39
Zoom out
Zoom in
Previous page
1/84
Next page
TASCAM SS-CDR200/SS-R200/SS-R100 39
7 Turn the MULTI JOG dial (or press the remote
control 5 and b buttons) to set it to
MASTER
or
SLAVE
as appropriate.
Options:
OFF
(default value),
MASTER
,
SLAVE
8 When you have finished making the setting, press
the HOME/DISPLAY button (or remote control
HOME/DISP button) to return to the Home Screen.
NOTE
The
LINK
playback setting is retained even after the
power is turned OFF.
Flash start function
Using the flash start function, you can instantly start
playback of tracks that you have registered in advance.
The beginnings of up to twenty tracks can be pre-loaded
into memory, so that playback can be triggered instantly
by a PS/2 or USB keyboard connected to the front panel,
or by an external device connected to the parallel
connector on the rear panel (SS-CDR200/SS-R200 only)
as well as by a TASCAM RC-20 Direct Play Remote (sold
separately).
1 Set the play area. (See “Play area on page 28.)
Set the play area as the playlist or folder that
contains the tracks you want to flash-start. Make
sure that there are no more than twenty tracks.
2 Set the playback mode to
CONTINUE
or
PROGRAM
.
(See “Playback modes” on page 29.)
NOTE
You cannot use Flash Load if the play mode is set to
RANDOM
.
3 When stopped, press the remote control FLASH
LOAD button.
The unit will successively read the beginning of each track
in the play area.
The tracks will be read in the order of playback. In other
words if the play mode is
CONTINUE
, the tracks will be
read consecutively, starting with the first. If the play mode
is
PROGRAM
, the tracks will be read in the order of the
program.
While the tracks are being read, the indicator on the
home screen will blink.
When the tracks have all been loaded, the indicator will
stop blinking and stay visible.
NOTE
If the playback mode is set to
RANDOM
and you press
the remote control FLASH LOAD button, a
CAN'T
SELECT
warning message pop-up will appear, and the
data will not be read.
If the playback mode is set to
SINGLE
and you press
the remote control FLASH LOAD button, the tracks in
the play area will be read successively in the same way
as for the
CONTINUE
setting.
If twenty-one or more tracks are registered, data for the
first twenty tracks from the beginning will be loaded.
4 When
FLASH
appears on the Home Screen, you can
trigger flash-start playback from a PS/2 or USB
keyboard connected to the front panel or from an
external device connected to the parallel connector
(SS-CDR200/SS-R200 only).
If you are using a PS/2 or USB keyboard, you can press
CTRL and a function key (F1–F12) to flash-start tracks
1–12 (see “Keyboard operation list” on page 74.).
If you are using the external parallel connector, you
will be able to flash-start tracks 1–20 (See “Using the
parallel connector on page 76.)
NOTE
Tracks to be flash started must have the same sampling
frequencies. If a track with a different sampling frequency
is detected while loading the tracks,
-- error --
and
FLASH LOAD
appear on the display, and the unit will
cancel track loading.
TIP
By setting the play area to
PLAYLIST
and selecting a
playlist that contains only the tracks that you want to
flash-start as the current playlist, you can efficiently use
the flash start setting for the desired tracks (see “Play area
on page 28 and “Editing the playlist (USB/SD/CF media
only)” on page 60).
4 − Preparations
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam SS-CDR100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam SS-CDR100 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info