617918

Tascam SS-CDR100 Manual

31
Zoom out
Zoom in
Previous page
1/84
Next page
TASCAM SS-CDR200/SS-R200/SS-R100 31
ENTER: resumes playback or playback standby
according to the status before locating
PLAY: starts playback
READY: enters playback standby
NOTE
•
If you enter only the track number and press the
ENTER, PLAY or READY button, the result is the same
as described in “Specifying a track number” (page 31).
•
You can also enter the numbers using a keyboard
number pad.
Jog playback
In jog playback mode, you can use the MULTI JOG dial on
the main unit to search by one frame at a time.
1 While pressing and holding the SHIFT button, press
the MENU [JOG] button to enable jog playback
mode.
The PLAY and READY buttons flash, and the track
elapsed time in the TRACK mode display on the Home
Screen shows the frame value.
Frame value
2 Turn the MULTI JOG dial to search.
3 To exit jog playback mode, press the STOP, PLAY
or READY [CALL] button. The unit responds to the
button pressed, stopping, playing back from or
pausing at the searched position, accordingly.
NOTE
If the Home Screen display is in any mode other than
TRACK mode, when using jog playback mode, the frame
value will not be shown in the track elapsed time. Press
the HOME/DISPLAY button (or remote control HOME/
DISP button) to change to TRACK mode before starting
jog playback mode.
Skipping backward and forward
During playback and playback standby, you can skip
backward of forward from the current position by the
preset skip time.
During playback or when in playback standby, press the
m [SKIP] or , [LOCK] button (or remote control
SEARCH m/, buttons) to locate backward or
forward from the current position by the SKIP TIME. After
locating, the previous state resumes.
NOTE
•
If the time from the beginning of the track is less than
the skip time when you press the m [SKIP] button
(or remote control SEARCH m button), the unit will
locate to the beginning of the current track.
•
If the time from the beginning of the track is less than
1 second when you press the m [SKIP] button (or
remote control SEARCH m button), the unit will
locate to the position that is the skip time before the
end in the previous track. However, if it is the first track
of the current device media or program, playback
standby will occur at the beginning of the current track.
•
In random playback mode, if you press the m [SKIP]
button (or remote control SEARCH m button) when
the time from the beginning of the track is less than the
skip time, the unit will always locate to the beginning
of the current track.
•
If the track remaining time is less than the skip time
when you press the , [LOCK] button (or remote
control SEARCH , button), the unit will locate to
the beginning of the next track. However, if it is the last
track of the current device media or program, playback
standby will occur at the end of the current track.
Setting the skip time
1 While pressing and holding the SHIFT button, press
the m [SKIP] button to open a pop-up window
where you can set the skip time.
2 Turn the MULTI JOG dial (or press the remote
control 5 and b buttons) to set the skip time.
Setting values:
1 sec
–
60 sec
(default value)
3 Press the MULTI JOG dial (or remote control ENTER
button) to confirm setting values and return to the
Home Screen.
Call function
The call function returns to the call point (point from
where playback last started from playback standby) and
puts the unit in playback standby
When in playback standby, press the READY [CALL]
button (or remote control CALL button) to return to the
point from where playback last started and start playback
standby.
4 − Preparations
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam SS-CDR100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam SS-CDR100 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info