617918

Tascam SS-CDR100 Manual

11
Zoom out
Zoom in
Previous page
1/84
Next page
TASCAM SS-CDR200/SS-R200/SS-R100 11
•
To clean the signal side of a disc, wipe gently with a soft
dry cloth from the center towards the outside edge.
Dirt on discs can lower the sound quality, so clean
them and always store them in a clean state.
•
Do not use any record spray, anti-static solutions,
benzene, paint thinner or other chemical agents to
clean CDs as they could damage the delicate playing
surface. It may cause CDs to become unplayable.
•
Do not apply labels or other materials to discs. Do
not use discs that have had tape, stickers or other
materials applied to their surface. Do not use discs that
have sticky residue from stickers, etc. Such discs could
become stuck in the unit or cause it to malfunction.
•
Never use a commercially available CD stabilizer. Using
stabilizers with this player will damage the mechanism
and cause it to malfunction.
•
Do not use cracked discs.
•
Only use circular compact discs. Avoid using
non-circular promotional, etc. discs.
•
Music discs with copy control, a copy-protection
system, have been released from several record
companies in an attempt to protect the copyright.
Since some of these discs do not comply with the CD
specifications, they may not be playable on the unit.
•
If you are in any doubt as to the care and handling of a
CD-R and CD-RW discs, read the precautions supplied
with the disc, or contact the disc manufacturer directly.
About CD-R and CD-RW discs
CD-R discs can be recorded once only. Once they have
been used for recording, they cannot be erased or
re-recorded. However, if space is available on the disc,
additional material can be recorded.
By finalizing a CD-R that you have finished using for
recording, you can make it playable by most ordinary CD
players. (Some CD players might not be able to play back
CD-R discs even if they are finalized.)
CD-RW discs allow recorded tracks to be erased to make
space available again, allowing disc reuse. However, tracks
can only be erased in the order from the last added. To
erase a track in the middle, you must erase all the tracks
added after it at the same time. Finalized CD-RW discs can
only be played back in CD players that support CD-RW
disc playback.
Slot loading of discs
1 As shown in the illustration, hold the disc with the
labeled side up and insert it part way into the slot.
2 After you push the disc a little further, it will be
pulled in automatically just before it disappears
into the slot.
Trouble inserting a disc
If the disc becomes stuck during insertion, for example,
and is difficult to push, do not try to force the disc in. Pull
the disc out once and press the EJECT button and then
try inserting it again. (Trying to force the disc in could
damage the unit.)
User registration
Customers in the USA, please visit the TASCAM website
(http://tascam.com/) to register as a user online.
1 − Introduction
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam SS-CDR100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam SS-CDR100 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info