617918
8
Zoom out
Zoom in
Previous page
1/84
Next page
8 TASCAM SS-CDR200/SS-R200/SS-R100
1 − Introduction
Thank you very much for purchasing a TASCAM
SS-CDR200 Solid State/CD Stereol Audio Recorder or
SS-R200/SS-R100 Solid State Stereo Audio Recorder.
Please read this manual thoroughly before using the unit
so that you understand correct operating procedures and
can use its functions fully. We hope that you enjoy using
this unit for many years.
Please keep this manual so that you can read it at
any time. A digital copy of this manual can also be
downloaded from the TEAC Global Site (http://teac-global.
com/).
SS-CDR200, SS-R200 and SS-R100
differences
The SS-R200 model adds XLR balanced inputs and
outputs, serial and parallel control connectors and EOM
functions to the features of the SS-R100.
The SS-CDR200 model adds a CD drive to the features of
the SS-R200.
The rear panels of the SS-CDR200 and SS-R200 models
have XLR balanced input and output connectors as well as
RCA unbalanced input and output connectors. The input
signal can be set to either the XLR balanced inputs or the
RCA unbalanced inputs.
Features
2-channel audio recorders can use USB memory, SD
cards and CF cards
SS-CDR200 units can also use CDs
1U rack-mount size
Using USB memory, SD and CF cards, playback and
recording of files in MP3 (44.1/48 kHz) and WAV formats
is possible (44.1/48 kHz, 16/24-bit, 24-bit can only be
played back)
Using CD media, playback and recording of files in
audio CD (CD-DA) and MP3 formats, as well as playback
of WAV format files is possible (SS-CDR200 only)
Built-in parallel and serial control ports can be used for
remote control (SS-CDR200/SS-R200 only)
Flash start function enables instant playback starting
Pitch control, key control and other playback control
functions
Play area can be set as desired using playlists and
folders
Track editing (WAV files only)
Built-in clock for time-stamping
Balanced (SS-CDR200/SS-R200 only) and unbalanced
analog audio inputs and outputs
Coaxial digital audio inputs and outputs
Included wired remote control allow reliable remote
operation
Control and character input using a PS/2 and USB
keyboards possible
Transport and pitch can be controlled using a TASCAM
RC-3F footswitch (sold separately)
Flash start using TASCAM RC-20 Direct Play Remote
(sold separately) supported
Included items
This product includes the following items.
Take care when opening the package not to damage the
items. Keep the package materials for transportation in
the future.
Please contact the retailer where you purchased this unit
if any of these items are missing or have been damaged
during transportation.
Main unit ........................................................................................ 1
AC power cord ............................................................................. 1
RC-SS2 remote control unit (with 5 m cable) ................... 1
A rack-mounting screw kit....................................................... 1
Security Screw kit ........................................................................ 1
Owner's manual (this manual) ............................................... 1
The warranty is included at the end of this manual.
Conventions used in this manual
In this manual, we use the following conventions:
The front panel illustration on the cover of this manual
is an SS-CDR200. The SS-R200 and SS-R100 models
have different appearances.
The display screens shown in this manual are from the
SS-CDR200. The SS-R200 and SS-R100 display screens
are different in some cases.
Buttons, jacks and other parts on the main unit
and external devices are indicated like this: HOME/
DISPLAY
Messages on the units display are shown like this:
MOVE
“USB flash drive is abbreviated as ”USB memory.
“SD memory card” is abbreviated as “SD card.
“CompactFlash card” is abbreviated as “CF card.
CD-DA format is sometimes referred to as “audio CD”
format. An audio disc containing tracks recorded in
audio CD format is sometimes referred to as an “audio
C D ”.
A CD containing MP3 or WAV files is sometimes referred
to as a data CD”.
Additional information is provided as necessary as tips,
notes and cautions.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam SS-CDR100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam SS-CDR100 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info