490775
7
Zoom out
Zoom in
Previous page
1/12
Next page
TASCAM RC-HS20PD 7
Using a commercially-available
cable
Under ordinary circumstances, use the dedicated
connection cable (5 m) that is included with the unit.
If the included dedicated cable is not long enough or
there is some other problem, use a commercially-available
category 6 LAN cable with straight wiring. When doing so,
however, make certain that the cable meets the following
requirements.
Always use a shielded cable.
The maximum cable length is 10 m.
Moreover, you must make the following enhancement to
the cable that you use.
1 Remove the ferrite cores (2) that are attached to
the connection cable included with the unit, and
attach them to both ends of the cable that is to be
used.
2 Tie the included bands to the cable near the ends
of the ferrite cores so that the cores do not move
away from the ends of the cable.
2 – Names and Functions of Parts
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam RC-HS20PD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam RC-HS20PD in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info