490775
6
Zoom out
Zoom in
Previous page
1/12
Next page
6 TASCAM RC-HS20PD
2 – Names and Functions of Parts
0 LEVEL knob
Use this to adjust the output level sent to the speaker
or headphones connected to the PHONES jack.
q ON LINE key/indicator
Switch on line playback mode ON/OFF.
Lights when ON, and is unlit when off.
In order to use on line function, you must also set the
HS-8. (See Activating online playback mode of “9 –
Online functions” in the HS-8 Owners Manual.)
w STOP key/indicator
Press to stop playback.
When stopped, the indicator above it lights.
e PAUSE key/indicator
Press this key during playback or when stopped to put
the unit in playback standby. This key lights when in
standby.
r PLAY key/indicator
Press this key when stopped or during playback
standby to start playback. During playback, the key
lights.
t 1–20 keys/indicators (flash playback keys)
Press to play the take assigned to the corresponding
key on the currently selected page of the Flash Start
screen.
Press a key that is lit to start playback of that take
immediately (flash playback). Keys that are lit
correspond to keys on the selected Flash Start screen
that have flash-loaded takes.
When takes are on the selected Flash Start screen, the
corresponding key blinks rapidly during playback and
blinks slowly during playback standby.
y 0dB LOCK switch
Engage this switch to prevent the fader from going
above 0dB.
u Fader
Use this to adjust the sound output level.
When the fader start function is ON, if you lower
the fader completely (move it to the “∞” position),
playback will pause to put the unit into playback
standby. During playback standby, raising the fader
above “∞” starts playback.
Rear panel
i REMOTE connector
Use the included cable to connect this unit with an
HS-8.
CAUTION
The REMOTE connector is not an Ethernet (LAN) connector.
Never connect a cable that is connected to a network.
Always turn the HS-8 unit power OFF before connecting
or disconnecting a cable. Connecting a cable while the
power is ON could cause damage.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam RC-HS20PD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam RC-HS20PD in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info