617924
52
Zoom out
Zoom in
Previous page
1/56
Next page
52 TASCAM MD-CD1MKIII
16 – Messages and Troubleshooting
Operation messages
ª
Message Details/response
Blank Disc
A blank recordable MD disc has been
inserted.
Complete
Editing operation has been successfully
completed.
Dubbing
W ait
The unit is being readied for dubbing.
TOC Reading
The table of contents data is being
read.
UTOC
W ritin g
The user table of contents data is
being written to the disc.
Now Editing
Editing operation is being performed.
Over Write
Overwrite recording mode is on.
Warning messages
ª
Message Details/response
Key Locked
The entire panel is locked. To release
the lock, press and hold the TIME and
DISPLAY buttons simultaneously.
CD Locked
The deck is locked. To release the lock,
select
none
under
PANEL LOCK?
in the SYSTEM submenu of the CD
menu.
MD Locked
Eject
Locked
Error Messages
ª
Message Details/response
Disc Error!
The disc has malfunctioned. Please
replace with a new disc.
Disc Full!
No recording time remaining on the
disc, so new recording is not possible.
Title Full!
No more titles can be recorded.
D-IN UNLOCK!
Digital signals are not correctly input.
This message appears if the selected
input source (coaxial or optical) does
not correspond to the connected
terminal or the connected device is
powered off. Select the input source
correctly, or turn on the connected
device.
Not
Execute!
Editing cannot be completed due to
MD system limitations.
Not Audio!
There is no audio signal from DIGITAL
INPUT.
No Track!
There are no recorded tracks.
PGM Empty!
There is no program
PGM Full!
No new programs can be created.
W_
Protected!
Write-protected MD disc, so recording
or editing is not possible.
Pre Master!
A playback-only MD disc has been
inserted.
TOC Error!
TOC data is not correct.
Can't Edit!
Editing cannot be performed due
to MD system limitations or editing
condition limits.
Can't Rec!
Recording cannot start because the
Group playback mode is on.
Can't Sel!
Menu selection cannot be performed
due to selection prohibitions.
Can't Undo!
You can’t undo since no editing has
been done.
Rec Error!
There was an error during recording.
Please re-record.
Drive Error!
There is a problem in the drive.
Sync Rec
O N!
The Sync mode is on, so the recording
cannot be started manually.
Err Group!
There is a problem in the data of the
created group.
No Group!
No groups have been created.
No DIR!
The directory where the file is has not
been registered.
Decode Err!
The MP3 file cannot be played back.
IR Disable!
All remote control operations are
disabled.
Format Err!
The unit does not support the format
of the MP3 files on the disc.
Troubleshooting
ª
There is no power to the unit.
Please check that the power cord is properly plugged in.
Disc Error!
is displayed.
The disc may be dirty. Please replace the disc.
Playback is not possible.
This may be due to condensation. In this case, remove
the disc, turn the power on and wait a few hours, then try
again.
No sound is output.
Confirm the connections with the audio system.
Check the volume level, and proper amplifier operation.
Recording isn’t possible.
The MD disc is set to write protect. Slide the tab on the
cartridge to the closed position and try again.
Confirm the connections with the audio system.
Adjust the recording level.
The disc may be for playback only. Please replace it
with a recordable MD disc.
Remaining recording time on the MD is insufficient.
Please delete unwanted tracks or replace the MD disc.
Confirm amplifier operation.
Noise or static can be heard.
Please re-position the unit away from strong sources of
magnetism such as a television.
The MD-CD1MKIII does not retain settings.
While settings are retained each time they are made, in
some cases they will not be retained when the power is
turned off too soon. To prevent this from happening, do
not turn off the power right after making a setting.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam MD-CD1MKIII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam MD-CD1MKIII in the language / languages: English as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info