617924
42
Zoom out
Zoom in
Previous page
1/56
Next page
42 TASCAM MD-CD1MKIII
Combine tracks (COMBINE)
Two successive tracks can be combined into one track by
deleting the track mark of the second track.
Example: To combine B and C
NOTE
Successive tracks recorded with different recording modes
cannot be combined into a single track.
1 Put the deck in play or in playback standby on the
second of the two tracks to be combined.
For example, if tracks 2 and 3 are to be combined,
play track 3 or put it in playback standby mode.
2 Select the
COMBINE?
option on the EDIT sub-
menu of the MD menu.
Track OK?
is displayed, and a 3-second segment
from the end of the first track and a 3-second
segment from the start of the second track are
successively played back repeatedly to enable
confirmation.
3 Press the MULTI JOG dial (or the YES button) on the
front panel, or the ENT/YES button on the remote
control.
After the tracks are combined,
Complete
is shown
on the display.
NOTE
If tracks are combined, the track numbers of
subsequent tracks are decremented.
If both tracks have titles, the combined track will take
the title of the first of the two tracks.
Move tracks (MOVE)
Tracks can be moved to different positions in the playing
order.
Example: To move D from track number 4 to track
number 2
1 Put the deck in play or in playback standby on the
track to be moved.
NOTE
If the above step is not performed first, and the following
operations are performed while the deck is in stop mode,
the last track will automatically be selected as the track to
be moved.
2 Select the
MOVE?
option on the EDIT sub-menu of
the MD menu.
Move ***>###
“ is displayed, with
***
representing the number of the track to be moved,
and
###
representing the track number where it
will be moved.
3 Use the MULTI JOG dial on the front panel, or the
MENU –/+ button on the remote control to select
the track number where it will be moved.
4 Press the MULTI JOG dial (or the YES button) on the
front panel, or the ENT/YES button on the remote
control.
Sure?
is displayed.
5 Press the MULTI JOG dial (or the YES button) on the
front panel, or the ENT/YES button on the remote
control.
After the track is moved,
Complete
is shown on the
display.
NOTE
If a track is moved, the track numbers are updated.
Creating a group
The MD-CD1MKIII enables tracks to be divided into
groups on a single MD disc for playback by group. Refer to
“MD group playback on page 34.
A group is created by specifying track numbers of the
starting” track and the ending” track.
1 In stop mode, select the
GRP CREATE?
option
from the EDIT sub-menu of the MD menu.
ST Trk> 001
is displayed. This shows the starting
track selection.
2 Use the MULTI JOG dial to select the starting track.
3 Press the MULTI JOG dial (or the YES button) on the
front panel, or the ENT/YES button on the remote
control.
ED Trk>***
is displayed. This shows the ending
track selection.
4 Use the MULTI JOG dial to select the starting track.
5 Press the MULTI JOG dial (or the YES button) on the
front panel, or the ENT/YES button on the remote
control.
Sure?
is displayed.
6 Press the MULTI JOG dial (or the YES button) on the
front panel, or the ENT/YES button on the remote
control.
After the specified group is created,
Complete
is
shown on the display.
10 – MiniDisc editing
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam MD-CD1MKIII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam MD-CD1MKIII in the language / languages: English as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info