587249
80
Zoom out
Zoom in
Previous page
1/100
Next page
80 TASCAM LR-10
13–Using the tuner
This unit has a built-in tuner. By inputting the sound of an
instrument, you can use the tuning meter on the display to
tune that instrument accurately. In addition, you can output a
tone for tuning from the built-in speaker or the /LINE OUT
jack, which is convenient for tuning multiple instruments
simultaneously, for example.
Preparation
1. Press the TUNER button to open the TUNER screen.
2. The
MODE
item is shown. Use the [ª] button and
Á button to select the tuner mode. The options are
AUTO ( [ª] : chromatic tuner mode) and OSC. (Á :
oscillator mode).
After selecting the mode, press the TUNER button again to
make settings for that mode.
3. The first item shown for each mode is
CALIB
. Use this to
set the frequency of A between 435 Hz and 445 Hz.
The setting value is shown on the right side of the screen.
This setting is the same for both tuner modes.
Use of each tuner mode is explained below.
NOTE
The signal input through the left MIC/LINE input channel is
used for tuning. When using the built-in microphones to tune
acoustic guitars and other instruments that have rapid sound
decay, in particular, tune the instrument as close to the left
built-in microphone as possible.
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam LR-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam LR-10 in the language / languages: English as an attachment in your email.

The manual is 4,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info