617900
57
Zoom out
Zoom in
Previous page
1/64
Next page
TASCAM HS-P82 57
Message Details and responses Remarks
Digital Input Error
AES1-2 (Unlocked)
AES3-4 (no signal)
AES5-6 (not audio)
AES7-8 (unmatched Cbit)
An error occurred with the digital input
selected for the input signal.
• Unlocked:
not synchronized with system
• no signal:
no signal is being input
• not audio:
Cbit information of input signal is
not audio
• not professional:
Cbit information of input signal is
consumer
• unmatched Cbit:
other Cbit information of input
signal is different from actual
operation mode
External Clock Lost,
Switched to Internal
Synchronization with an external clock
was disrupted, so the internal clock was
activated.
External Clock Regained
Switch to External?
Synchronization with an external clock
became possible again.
EXTERNAL DC Power Lost,
Switched to INTERNAL BATTERY
External DC power was lost, so the internal
battery was activated.
EXTERNAL DC power
now available,
Switch to EXTERNAL DC?
While operating using the internal battery,
external DC power became available.
EXTERNAL DC Voltage too low,
Switched to INTERNAL BATTERY
The voltage of the external DC battery
became low, so the internal battery was
actived.
Input Volume Locked
Input Volume
is locked
The input volume control has been locked to
prevent misoperation.
INTERNAL BATTERY Power Lost,
Switched to EXTERNAL DC
The internal battery was removed, so the
external DC power source was activated.
INTERNAL
BATTERY
Voltage
too
low,
Switched to EXTERNAL DC
The voltage of the internal battery became
low, so the external DC power source was
activated.
Last loaded project has
no scenes.
Please make new scene.
The most recently loaded project does not
have any scenes. Create a new scene.
Last loaded project
cannot be found.
Please select a project.
The last selected project cannot be found.
Select a different project.
Last loaded scene
cannot be found.
Please select a scene.
The last selected scene cannot be found.
Select a scene.
Load selected project?
""pppppppp""
Confirm that you want to load the selected
project.
pppppppp = name of project to load
Load selected Scene?
""ssssssss""
Confirm that you want to load the selected
scene.
ssssssss = name of scene to load
Load selected Take?
""tttttttt""
Confirm that you want to load the selected
take.
tttttttt = name of take to load
Loading Project...
The project is loading.
Loading Scene...
The scene is loading.
Loading Take...
The take is loading.
Lost all power.
Shutdown automatically
in 20 seconds.
All power sources have been lost. The unit
will automatically shut down in 20 seconds.
Make new scene?
""ssssssss""
Confirm that you want you want to make a
new scene.
ssssssss = scene name
Make Scene failed
Creation of the scene failed.
Making Scene...
The scene is being created.
Mark Point set
The mark has been created.
New Scene Name must not
start with ""@""
The scene name is not allowed. A scene
name must not start with the "@" mark.
No Call Point
The call point does not exist.
10 – Messages
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-P82 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-P82 in the language / languages: English as an attachment in your email.

The manual is 8,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info