617900
27
Zoom out
Zoom in
Previous page
1/64
Next page
TASCAM HS-P82 27
3 Touch the buttons next to the
PHANTOM
+48V
item
on the
INPUT
page for the input channels that need
phantom power to turn it ON.
CAUTION
Confirm that phantom power is OFF before connecting a
line level device to a MIC/LINE IN connector. If you connect
a line level device while phantom power is ON, that device
or this unit could be damaged.
Confirm that phantom power is OFF before connecting
or disconnecting a condenser microphone to a MIC/LINE
IN connector. If you connect or disconnect a microphone
while phantom power is ON, that mic or this unit could be
damaged.
Do not connect an unbalanced dynamic microphone to an
XLR connector that is supplying phantom power. Doing so
could damage the microphone or this unit.
Setting the inputs
1 Press the MENU key on the front panel to open the
MENU
screen.
2 Touch the
MIXER
SETUP
button to open the
MIXER
SETUP
screen.
On the
INPUT
page, set each channel’s input source,
turn phantom power ON or OFF for each input, and turn
the sampling rate converter ON or OFF for each pair of
inputs. For details, see “INPUT page” on page 43.
3 If necessary, open the
SIGNAL
PROCESSING
and
SETUP
tabs to make additional settings.
On the
SIGNAL
PROCESSING
page, you can reverse the
phase, and turn the low-cut filter and limiter ON or OFF.
To adjust the low-cut filter settings, touch the
LowCut
Filter
button to open the
LOW
CUT
FILTER
screen. For
details, see “SIGNAL PROCESSING page” on page 43.
From the
SETUP
page, you can edit channel names and
turn channel links ON and OFF.
To edit channel names, touch the buttons next to the
CH
NAME
item. For details, see “CHx NAME (button)” on
page 44.
Input settings can also be changed on the
CHx
SETUP
(1-8)
screens.
Touch the
CHANNEL
SETUP
button on the
MENU
screen.
To open a
CHx
SETUP
screen, touch that
CHANNEL
button at
the top of the
MIXER
SETUP
screen.
See “Channel Settings (CHANNEL SETUP)” on page
44 details about making settings on the
CHANNEL
SETUP
screens.
4 − Recording and Playback
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-P82 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-P82 in the language / languages: English as an attachment in your email.

The manual is 8,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info