617900
21
Zoom out
Zoom in
Previous page
1/64
Next page
TASCAM HS-P82 21
Battery display
At the top right of every screen is a button that opens the
power screen.
Touch this button to open the
BATTERY
management screen.
STATUS
This shows the currently active power source.
AC/DC EXT/BATT
The indicator for the currently active power source appears
green.
The current voltage for each power source is shown beneath
its
HEALTH
label.
The type of battery currently installed in the unit is shown
beneath the
BATT
label.
NONE
: No internal battery is installed
NP
: Shown when an NP type battery is installed
PACK
: Shown when a battery case (BC-10AA) is
installed
The following settings can be made for the
DC EXT
and
BATT
items.
MINIMUM
: Set the minimum battery voltage between 9.0
V and 13.0 V in 0.5 V steps (default value: 10.5V)
NOMINAL
: Set the usual voltage to 12.0 V (default value),
13.2 V, 14.4 V, 14.8 V or 15.0 V
The recommended values depending on the type of battery
are as follows.
NP type batteries
Type of batteries Minimum voltage Nominal voltage
NiMH 12.0 V 11.0 V 12.0 V
NiMH 13.2V 12.0 V 13.2 V
Li-Ion 14.4V 13.0 V 14.4 V
Li-Ion 14.8 V 13.0 V 14.8 V
Deep cycle lead
12 V
10.5 V 12.0 V
Batteries (using the supplied battery case
BC-10AA)
Type of batteries Minimum voltage Nominal voltage
NiMH
rechargeable
batteries (AA)
10.5 V 12.0 V
Alkaline batteries
(AA)
9.0 - 9.5 V 15.0 V
The minimum and nominal voltages in the above tables are
typical values of commercially available batteries. Please
set them according to the battery manual.
CAUTION
If the minimum voltage is too low, there is a danger of
damaging rechargeable batteries through excessive discharge.
NOTE
A great amount of power is required to provide phantom
power to a condenser microphone. If you use a condenser
microphone while running the unit on AA batteries (NiMH
rechargeable or alkaline), the operation time will be greatly
shortened because of their low capacities. If you need to
operate the unit for a long time, use the AC adaptor or a
battery with great capacity.
Touch the area of the value that you want to change. When
the background color changes, use the DATA dial to set the
value.
ICON TYPE (Battery status display):
You can set the battery status display icon type by touching
the
BARS
( / ) or
VOLTS
( / ) button. The
default value is
BARS
.
3 − Preparation
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-P82 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-P82 in the language / languages: English as an attachment in your email.

The manual is 8,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info