617905
64
Zoom out
Zoom in
Previous page
1/72
Next page
64 TASCAM HS-8
Message
Details and responses Remarks
Digital Input Error
DIN1-2 (Unlocked)
DIN3-4 (no signal)
DIN5-6 (not audio)
DIN7-8 (unmatched Cbit)
An error occurred with the digital input selected
for the input signal.
• Unlocked:
not synchronized with system
• no signal:
no signal is being input
• not audio:
Cbit information of input signal is
not audio
• not professional:
Cbit information of input signal is
consumer
• unmatched Cbit:
other Cbit information of input signal
is different from actual operation
mode
External Clock Lost,
Switched to Internal
Synchronization with an external clock was
disrupted, so the internal clock was activated.
External Clock Regained
Switch to External?
Synchronization with an external clock became
possible again.
Folder Copy failed
Copying failed.
Folder Delete failed.
Deletion of the folder failed.
Folder Load failed.
Loading of the folder failed.
Input Volume Locked
Input Volume
is locked
The input volume is locked to prevent accidental
operation.
Last loaded project has
no folders.
Please make new folder.
The most recently loaded project does not have
any folders. Create a new folder.
Last loaded project
cannot be found.
Please select a project.
The last selected project cannot be found. Select
a different project.
Last loaded folder
cannot be found.
Please select a folder.
The last selected folder cannot be found. Select
a folder.
Load selected project?
""pppppppp""
Confirm that you want to load the selected
project.
pppppppp = name of project to load
Load selected Folder?
""ssssssss""
Confirm that you want to load the selected
folder.
ssssssss = name of scene to load
Load selected Take?
""tttttttt""
Confirm that you want to load the selected take. tttttttt = name of take to load
Loading Project...
The project is loading.
Loading Folder...
The folder is loading.
Loading Take...
The take is loading.
Make new folder?
""ssssssss""
Confirm that you want you want to make a new
folder.
ssssssss = folder name
Make Folder failed
Creation of the folder failed.
Making Folder...
The folder is being created.
Mark Point set
The mark has been created.
New Folder Name must not
start with ""@""
The folder name is not allowed. A folder name
must not start with the "@" mark.
No Call Point
The call point does not exist.
No Mark Point
The mark point does not exist. You tried to skip marks before the Mark
point was accorded. This disappears
automatically after 2 seconds.
No Tracks Armed for Record
The record function is not ON for any tracks.
Operation failed.
The operation could not be completed for some
reason.
Operation failed.
Internal File / Folder
limit reached.
The maximum number of files and folders
that can be created has been reached, so the
operation could not be completed.
Operation failed.
Cannot find this ***.
Please Rebuild.
The selected project/folder/take could not be
found, so the operation could not be completed.
Rebuild the selected item.
*** = project, folder or take
12 – Messages
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-8 in the language / languages: English as an attachment in your email.

The manual is 4,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info