617905
61
Zoom out
Zoom in
Previous page
1/72
Next page
TASCAM HS-8 61
If the operation of this unit becomes irregular, please
check the following things before requesting repair. If the
following measures do not resolve the problem, contact
the store where you purchased the device or a TEAC
Repair Center
Power does not turn on.
ª
Confirm that the power plug, for example, is connected
completely.
Media is not recognized.
ª
Confirm that the CF card is securely inserted into the
CF slot.
Pause recording or playback.
The unit does not function.
ª
Is the panel lock function ON?
Playback is not possible.
ª
Confirm that the file is of a compatible
sampling frequency (44.1/48/48 pull-down/48
pull-up/88.2/96/176.4/192 kHz) and bit rate (16/24).
There is no sound.
ª
Reconfirm the connections of your monitoring system
and check the level of your amplifier.
Confirm that the “Level” setting on the HOME (PAN/
LEVEL) screen is not lowered.
If you are using an RC-HS20PD, confirm that the fader is
not lowered.
If you cannot hear the input signal, arm recording and
turn input monitoring ON.
If you cannot hear the playback sound, turn input
monitoring OFF.
Check the online function and online playback mode
settings.
Recording is not possible.
ª
Reconfirm connections.
Adjust the recording levels.
If the CF card does not have enough capacity, erase
unneeded data and increase the amount of open space
or change the CF card.
If the maximum number of recordable takes or the
maximum take number has been reached, change the
recording folder.
If the total number of items in the folder, including
files and subfolders is too large, change the recording
folder.
Setting changes that I made are not
ª
remembered.
This unit backs up settings whenever the CF card
selection is changed, a project, folder or take is loaded,
and playback or recording occurs. After startup, if none
of these actions is conducted, settings might not be
backed up even if they are changed.
I hear noise.
ª
Confirm that all cable connections are secure.
The touch panel does not work properly.
ª
Do not use commercially-available protective film for
LCD screens on the touch panel.
Confirm that the panel lock function is not engaged
and locking the display.
I cannot create a new project.
ª
Confirm that a project with the same name does not
already exist.
If the amount of space remaining on the CF card is
too small, a new project cannot be created. Erase
unnecessary data and then try again.
11 – Troubleshooting
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-8 in the language / languages: English as an attachment in your email.

The manual is 4,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info