617905
20
Zoom out
Zoom in
Previous page
1/72
Next page
20 TASCAM HS-8
About the display
Adjusting the display angle
Push the LCD TILT btton to unlock the display, and then
pull the bottom of the display forward to adjust the angle.
Pull the bottom of the display until you hear a clicking
sound.
To restore it to its flat position, push the LCD TILT button
again to unlock the display, and push the bottom of the
display. Do not push the display surface. Push the bottom
of the display until you hear a clicking sound.
CAUTION
Do not push the display screen itself.
Adjusting the display and indicator
brightness
Turn the DATA dial while pressing and holding the HOME
key to adjust the brightness of the color display, the
PAUSE, REC and PLAY keys, and the JOG (SHUTTLE), SLOT
1 and SLOT 2 indicators.
Push and turn the DATA dial while pressing and holding
the HOME key to adjust only the brightness of the color
display.
CAUTION
The display can easily be scratched, so do not use pointed
objects, including ngernail tips, to touch it. Always touch it
with your ngers.
Do not press the display forcefully with a nger or poke it with a
pen, toothpick or other pointed object. Doing so could scratch
the display or cause malfunction.
The display touch panel is comprised of a lm and glass. Do
not apply a strong force to its surface. Doing so could break the
glass.
When using the display, do not put a hand on the panel or push
around the display forcefully. Doing so could prevent accurate
position detection.
Do not place anything on top of the display or otherwise put
weight on the same place for a long time. Doing so could cause
the panel to warp or result in inaccurate position detection.
Do not apply a commercially-available screen protection lm to
the display. Doing so could prevent normal operation.
Gently wipe the display with a soft dry cloth that does not shed
dust (e.g. a cleaning cloth). Avoid wiping with a sti cloth or
rubbing with force. Doing so could damage the surface of the
LCD. Do not use benzene, thinner, manicure remover, alcohol or
similar substances.
NOTE
The display is produced with extremely high-precision manufac-
turing technologies, and 99.99% or more of the pixels are eective,
but sometimes pixels might not appear or might appear as red or
black dots. This is not a malfunction.
Turning the power ON and OFF
Open the front panel POWER switch cover to turn the
power ON with the switch.
Startup screen
Home Screen
To turn the power OFF, push the switch on the front panel
again.
3 − Preparation
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-8 in the language / languages: English as an attachment in your email.

The manual is 4,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info