617905
17
Zoom out
Zoom in
Previous page
1/72
Next page
TASCAM HS-8 17
UserWord
mode (button)
Use the user word for the first half of the take name.
Press the EDIT button to open the screen where you
can change the user word. (This works the same as the
screen for editing project names.)
Folder
Name
mode (button)
Use the folder name as the first half of the take name.
This is the default value.
• Second half of take names
The second half of the take name is comprised of one
alphabetical letter and a three-digit number.
Press the EDIT button to open the screen where you
can change the letter.
You can change the three-digit number with the + and
– buttons. You can also touch the numerical part to
highlight it in yellow and use the DATA dial to change
the number.
The numerical part cannot be selected when the track
is soloed.
In the following cases,
---
appears and the value
cannot be changed.
No project or folder is loaded
The selected CF card is unavailable
When the numerical part of the file name of the
current take is 999
NOTE
The “Next Take Name” setting is saved with each project. If you
change projects, the setting of the loaded project is used.
The numerical part of the second half of the take name can be
changed even during playback and recording. (The rst half
of the take name and the letter in the second half can only be
changed when stopped.)
If the rst half of the take name or the letter in the second half
are dierent, a take that has the same three-digit number in the
second half can be created.
When the unit is put in recording standby, the le name of the
next take to be recorded is shown above the take name button
on the Home Screen.
i PAN/LEVEL button
Press this button to open the
PAN/LEVEL
page where
you can adjust stereo mix recording and the 2mix
output.
Each channel has a
PAN
and
2Mix
LVL
knob. If you
touch one, its background becomes white and you can
control its parameter with the DATA dial.
If two channels are linked, the
PAN
knob functions as a
balance adjustment knob.
When in solo mode,
PAN
or
2Mix
LVL
knob cannot be
selected.
o INFO button
Press this button to open the
INFO
page, which shows
the current settings of the unit and information about
the loaded file.
The
Play
Info
section shows information related to
current playback settings. If an item is gray, that item is
OFF.
Touch this part to open the
PLAY
SETUP
screen.
The
Sys. Info
section shows the current settings
of this unit. Touch this part of the screen to open the
SYNC
T/C
screen.
The
File
Info
section shows information about the
currently loaded file. Touch this part of the screen to
open the
PROJECT
screen. You can also use the DATA
dial to scroll the display of project and take names.
NOTE
On this screen only, when a track is soloed, a SOLO knob appears in
place of the TC and SYNC indicators at the top right.
p Mark List button
Press this button to open the mark list. (See “Mark list
screen on page 55.)
2 − Names and functions of parts
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-8 in the language / languages: English as an attachment in your email.

The manual is 4,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info