617905
11
Zoom out
Zoom in
Previous page
1/72
Next page
TASCAM HS-8 11
2 − Names and functions of parts
Rear panel
g ANALOG INPUTS 1-8 connector
This 25-pin D-sub connector is for analog balanced
line input. The pin assignments are as follows.
h ANALOG INPUTS A and B connectors
These A/B balanced XLR connectors are for analog
balanced line inputs (1: GND, 2: HOT, 3: COLD). Set
which channels the signals input through these
connectors are recorded to using the unit settings.
j DIGITAL I/O (ADAT) 1-8 connectors
These connectors are for the input (IN) and output
(OUT) of ADAT optical format digital audio. Sampling
frequencies of 44.1 kHz and 48 kHz are supported.
k REMOTE cover
This cover is attached when the unit is new. Remove
the two screws from the cover to access and use the
REMOTE connector.
l RS-422 connector
This 9-pin D-sub connector is for RS-422 serial control.
Connect an external controller, for example, here.
NOTE
This cannot be used at the same time as the RS-232C connector. (See
“RS-422 page” on page 48.
; RS-232C connector
This 9-pin D-sub connector is for RS-232C control.
Connect an external controller, for example, here.
NOTE
This cannot be used at the same time as the RS-422 connector (See
“RS-232C page” on page 48.)
z PARALLEL connector
This 25-pin D-sub connector is for parallel control.
Connect an external controller, for example, here.
x AC inlet
Connect the provided AC power cord set here.
c ANALOG OUTPUTS 1-8 connector
This 25-pin D-sub connector is for analog balanced
line output. The pin assignments are as follows.
v ANALOG OUTPUTS L/A and R/B connectors
These A/B balanced XLR connectors are for analog
balanced line outputs (1: GND, 2: HOT, 3: COLD).
These output the stereo signal mixed in this unit or the
monitoring signal (the same sound output from the
PHONES jack, including soloed tracks, etc.).
b DIGITAL I/O (AES/EBU) 1-8 connector
This 25-pin D-sub connector is for digital audio input
and output in AES/EBU (AES3-2003/IEC60958-4)
format.
Transmission occurs at double speed when the
sampling frequency is 88.2 or 96 kHz and at quad
speed when 176.4 or 192 kHz.
The digital input section includes a sampling
rate converter that is compatible with sampling
frequencies between 32–216 kHz.
The pin assignments are as follows.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-8 in the language / languages: English as an attachment in your email.

The manual is 4,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info