617903
147
Zoom out
Zoom in
Previous page
1/152
Next page
TASCAM HS-4000
147
18 – Specifications
IEC60958–4 (AES3–2003, AES/EBU)
Supported sampling frequencies:
44.1/47.952/48/48.048/88.2/96 kHz
(47.952/48.048:48kHz±0.1% pull-down/pull-up)
(Single/Double)
Control inputs and outputs
RS–422
Connector type: D-sub 9-pin (female, inch-specification)
RS–232C
Connector type: D-sub 9-pin (female, inch-specification)
PARALLEL
Connector type: D-sub 25-pin (female, inch-specification)
TIME CODE IN
Connector type: XLR-3-31
Signal voltage amplitude: 0.5 – 10 Vp-p
Input impedance 10 kΩ
Format: SMPTE 12M-1999 compliant
TIME CODE OUT
Connector type: XLR-3-32
Signal voltage amplitude: 2 Vp-p
Output impedance: 100 Ω
Format: SMPTE 12M-1999 compliant
WORD/VIDEO IN connector
Connector type: BNC
Input voltage: 5V TTL equivalent (WORD IN)
Signal voltage amplitude: 1 Vp-p (VIDEO IN)
Input impedance: 75 Ω±10%
Permissible frequency variation during external synchronization:
±100 ppm
Includes switch for enabling termination
Input frequency (WORD):
44.1/47.952/48/48.048/88.2/96 kHz
(47.952/48.048:48kHz±0.1% pull-down/pull-up)
Input signal (VIDEO):
24/25/29.97/30Frame
(NTSC/PAL Black burst, HDTV Tri-Level)
WORD/VIDEO THRU/OUT connector
Connector type: BNC
Signal voltage amplitude: 5V TTL equivalent
Output impedance: 75 Ω ±10%
Output frequency (WORD):
44.1/47.952/48/48.048/88.2/96 kHz
(47.952/48.048kHz:48k±0.1% Pull-down/Pull-up)
Frequency stability ±10 ppm or less (Ta = 20º C)
OUT/THRU switch included (OUT is only for WORD OUT)
ETHERNET
Connector type: RJ45
Supported specifications: 100BASE-TX, 1000BASE-T
KEYBOARD
Connector type: Mini DIN (PS/2)
USB Connector:
USB A-type 4-pin
Protocol: USB2.0 HIGH SPEED(480Mbps)
REMOTE
Connector type: ETHERCON (CAT6 supported)
Supplied power voltage: 41 V
Signal: LVDS serial
Audio performance
Frequency response
ANALOG IN to ANALOG OUT:
i 20Hz - 20kHz:±0.5dB
(Fs=44.1/48kHz, JEITA) (recording and playback)
i 20Hz - 40kHz: +0.5dB/−2dB
(Fs=88.2/96kHz, JEITA) (recording and playback)
Distortion
ANALOG IN to ANALOG OUT:
0.005% or less (JEITA) (recording and playback)
S/N ratio
ANALOG IN to ANALOG OUT:
100 dB or more (JEITA) (recording and playback)
Other specifications
Power
AC 100-240 V, 50–60 Hz
Power consumption
19W
External dimensions (W x H x D, excluding
protrusions)
482.6 x 94 x 317.1mm/19.00 x 3.70 x 12.48 in
Weight
5.1 kg/11.24 lb
Operating temperature range
5 - 35 °C
147


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-4000 in the language / languages: English as an attachment in your email.

The manual is 10,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info