617903
17
Zoom out
Zoom in
Previous page
1/152
Next page
TASCAM HS-4000
17
2 − Names and functions of parts
The number shown when searching
forward (shuttle operation) changes with
the current speed: x2, x4, x8, x16, x32.
Recording
Recording standby
Touch this area to open the PLAY SETUP screen.
9 Session name (button)
This shows the currently active session name. A “*” appears
when the session has not been saved after editing (including
the addition and removal of session editing marks).
Touch this area to open a pull-down menu.
START TIME EDIT button
This opens the START TIME screen where you can set the
timeline mode starting time. This can only be selected when
stopped.
REBUILD button
Use to rebuild when, for example, a file has been erased
from the unit using FTP.
This can only be selected when stopped.
SAVE button
This saves the contents of the timeline.
This can only be selected when stopped.(See “Saving
timelines” on page 56.)
EXPORT AES31 button
This outputs (exports) the session as an AES31 file. This
can only be selected when stopped.(See “Exporting AES31
editing information on page 55.)
IMPORT ALL TAKES button
Touch to import all session takes.
This can only be selected when stopped.(See “Importing all
takes” on page 56.)
0 Track numbers and record function and input
monitoring indicators
The indicators at the left end of the level meters show
the status of record arming and input monitoring. The
background colors of the indicators mean the following.
REC OFF REC ON
MON OFF
MON ON
q Level meters
The input signal level for a track is shown if input monitoring
for it is set to ON or if it is armed for recording and not
playing back. Each track also has an overload indicator at its
right end that appears red when the input overloads.
During playback, the playback level of a track is shown if
input monitoring is set to OFF.
When the input source is set to a digital input, but there is
no input signal or if the input signal differs from the internal
setting, the channel meter display area appears gray and
one of the following messages appears. (The “x indicates
the channel.)
Display Meaning
D-INx NO SIGNAL No input signal
D-INx UNLOCK
Input signal is not synchronized
with the system
D-INx NOT AUDIO
Cbit information of the input
signal is not audio
D-INx Cbit ERROR
Other input signal Cbit infor-
mation differs from the actual
operation mode
D–IN1 UNLOCK shown
The following settings can be made for the display of the
level meters on the METER SETUP screen from the MENU
screen.
o Metering point
o Peak hold time
o Release time
o Overload indicator peak level
o Reference level line display on/off
You can also touch these areas to output just one pair of
channels (1-2 or 3-4) for monitoring (solo function).
The level meters and track numbers for the soloed channels
appear highlighted in yellow.
The level meters for the channels that are not soloed appear
shaded. Touch the same channel pair again to stop soloing
them.
w Time display area
When the time display mode has been set to show a
timeline with four equal divisions, four times are shown.
This area has 4 equal divisions, showing 4 time points on the
timeline.
The values match the time display mode.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-4000 in the language / languages: English as an attachment in your email.

The manual is 10,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info