617904
151
Zoom out
Zoom in
Previous page
1/156
Next page
TASCAM HS-2000
151
18 – Specifications
Digital audio inputs and outputs
DIGITAL IN [LINE] connector
Connector: XLR-3-31
Input signal voltage amplitude: 200 mVp-p to 10 Vp-p
Input impedance: 110 Ω ±20%
Format: AES3-2003/IEC60958-4 (AES/EBU)
IEC60958-3 (S/PDIF)
Supported sampling frequencies:
44.1/47.952/48/48.048/88.2/96/176.4/192kHz
(single/double/quad)
(47.952/48.048: 48 kHz ±0.1% pull-down/pull-up)
Note: When SRC is ON, the receivable range is 32–192
kHz.
DIGITAL OUT [LINE] connector
Connector: XLR-3-32
Output voltage: 2–5 Vp-p
Output impedance: 110 Ω ±20%
Format: IEC60958-4 (AES3-2003, AES/EBU)
Supported sampling frequencies:
44.1/47.952/48/48.048/88.2/96/176.4/192kHz
(single/double/quad)
(47.952/48.048: 48 kHz ±0.1% pull-down/pull-up)
Control inputs and outputs
RS-422 connector
Connector: D-sub 9-pin (female, inch-standard)
RS-232C connector
Connector: D-sub 9-pin (female, inch-standard)
PARALLEL connector
Connector: D-sub 25-pin (female, inch-standard)
Timecode INPUT connector
Connector: XLR-3-31
Signal voltage amplitude: 0.5–10 Vp-p
Input impedance: 10 kΩ
Format: SMPTE 12M-1999 compliant
Timecode OUTPUT connector
Connector: XLR-3-32
Signal voltage amplitude: 2 Vp-p
Output impedance: 100 Ω
Format: SMPTE 12M-1999 compliant
WORD/VIDEO IN connector
Connector: BNC
Input voltage: 5V TTL equivalent (WORD IN)
Signal voltage amplitude: 1 Vp-p (VIDEO IN)
Input impedance: 75 Ω ±10%
Allowable frequency deviation of external
synchronization: ± 100 ppm
Includes switch for enabling termination
Input frequency (WORD):
44.1/47.952/48/48.048/88.2/96/176.4/192kHz
(47.952/48.048: 48 kHz ±0.1% pull-down/pull-up)
Input signal (VIDEO):
24/25/29.97/30 Frame
(NTSC/PAL Black burst, HDTV Tri-Level)
WORD/VIDEO THRU/OUT connector
Connector: BNC
Signal voltage amplitude: 5V TTL equivalent
Output impedance 75 Ω ±10%
Output frequency (WORD):
44.1/47.952/48/48.048/88.2/96/176.4/192kHz
(47.952/48.048: 48kHz±0.1% pull-down/pull-up)
Frequency stability: ±10 ppm or less (Ta = 20º C)
OUT/THRU switch included
(OUT is only for WORD OUT)
ETHERNET connector
Connector: RJ45
Supported standards: 100BASE-TX, 1000BASE-T
KEYBOARD connector
Connector: Mini-DIN (PS/2)
USB connector
Connector: USB A-type 4-pin
Protocol: USB 2.0 HIGH SPEED (480 Mbps)
REMOTE connector
Connector: etherCON (CAT6 compatible)
Power supply voltage: 13 V/41 V
Signal: LVDS serial
151


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-2000 in the language / languages: English as an attachment in your email.

The manual is 12,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info