617906
45
Zoom out
Zoom in
Previous page
1/128
Next page
TASCAM HS-20
45
7 – Timeline mode
Editing the timeline
You can cut, erase and divide regions, for example.
The basic procedures for editing are as follows.
See the explanation of each function for detailed procedures.
1. Press the HOME key on the front of the unit to open the
Home screen.
2. Touch the EDIT MODE button to enter edit mode.
The EDIT MODE button becomes white with red lettering,
and the REC/MON, Bounce I/O and NEXT TAKE NAME
buttons disappear and are replaced with the EDIT, Fade/
Level and SET/SELECT buttons.
3. Touch the EDIT button to open the pull-up menu.
The pull-up menu has buttons used for editing, including
nine editing buttons (Copy, Cut, Erase, Divide, Insert, Insert
File, Insert Mute, Paste and Paste File) and UNDO and REDO
buttons.
CAUTION
If you do not save the AES31 editing information after
changing it, all changes will be cleared when you load
another folder or AES31 editing information file, remove a
card or turn off the unit’s power, for example.
NOTE
Repeated recordings or editing may greatly consume the
memory used in managing regions or editing history. In
this case, "Cannot Edit. System limit reached." appears in a
pop-up message
Selecting the range to copy/cut/delete
o When the editing start and finish points are set, the range
between the points is selected.
o When the editing start and finish points are not set, the
entire region at the time cursor is selected.
Editing start and stop points not set
o When the timeline cursor is on the borderline between
regions, the region to the right will be edited. If the region
to the right is muted, it will not be selected.
Setting the editing start point
1. Press the HOME key on the front of the unit to open the
Home screen.
2. Touch the EDIT MODE button to enter edit mode.
3 Use the m
and
, keys, for example, to locate the
timeline cursor at the position (time) where you want to
start editing.
4. Touch the SET/SELECT button to open the pull-up menu.
5. Touch the SET IN button on the pull-up menu to set the
editing start point (IN point)
The IN mark (
) appears at the current position in the mark
display area.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-20 in the language / languages: English as an attachment in your email.

The manual is 4,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info