617907
129
Zoom out
Zoom in
Previous page
1/132
Next page
TASCAM HS-2 129
Digital audio inputs and outputs
DIGITAL IN (S/PDIF) connectors
Connector: RCA pin jack
Input signal voltage amplitude:
200mVp-p to 600mVp-p / 75Ω
Input impedance: 75Ω
Format: AES3-2003 / IEC60958-4 (AES/EBU)
IEC60958-3 (S/PDIF)
Supported sampling frequencies:
44.1/48/88.2/96/176.4/192kHz (Single / Double / Quad)
Note: When SRC is ON, the receivable range is 32 – 192 kHz.
DIGITAL IN (AES/EBU) connector
Connector: XLR–3–31
Input signal voltage range:
200 mVp–p to 10 Vp–p/110Ω
Input impedance 110Ω ±20%
Format: AES3-2003/IEC60958-4(AES/EBU)
IEC60958-3(S/PDIF)
Supported sampling frequencies:
44.1 / 48 / 88.2 / 96 / 176.4 / 192kHz (Single/ Double/ Quad)
Note: When SRC is ON, the receivable range is 32–192 kHz.
DIGITAL OUT (S/PDIF) connectors
Connector: RCA pin jack
Output voltage: 0.5 Vpp ±20% / 75Ω
Input impedance: 75Ω
Format: IEC60958-3 (S/PDIF)
Supported sampling frequencies:
44.1 / 48 / 88.2 / 96 / 176.4 / 192kHz (Single/ Double/ Quad)
DIGITAL OUT (AES/EBU) connectors
Connector: XLR–3–32
Output voltage: 2–5 Vp–p/110Ω
Output impedance: 110Ω ±20%
Format: IEC60958–4 (AES3–2003, AES/EBU)
Supported sampling frequencies:
44.1 / 48 / 88.2 / 96 / 176.4 / 192kHz (Single/ Double/ Quad)
Control inputs and outputs
RS422 (attached with Option SY-2 board)
Connector: D–sub 9-pin (inch pitch threads.)
RS–232C
Connector: D–sub 9-pin (inch pitch threads.)
PARALLEL
Connector: D–sub 25-pin (inch pitch threads.)
TIME CODE IN (attached with Option SY-2 board)
Connector: BNC connector
Signal voltage amplitude: 0.5–5Vp–p
Input impedance 10 kΩ
Format: SMPTE 12M–1999 compliant
TIME CODE OUT (attached with Option SY-2 board)
Connectors: BNC connector
Signal voltage amplitude: 2 Vp–p
Output impedance: 600Ω
Format: SMPTE 12M–1999 compliant
WORD/VIDEO IN
Connector: BNC
Input voltage: 5V TTL equivalent (WORD IN)
Signal voltage amplitude: 1 Vp–p (VIDEO IN)
Input impedance: 75Ω ±10%
Allowable frequency deviation of external synchroni-
zation: ±100 ppm
Includes switch for enabling termination
Input frequencies (WORD):
44.1 / 48 / 88.2 / 96 / 176.4 / 192kHz
Input signal (VIDEO): 24/25/29.97/30 Frame (NTSC/PAL
Black burst, HDTV Tri–Level)
WORD/VIDEO THRU/OUT
Connector: BNC
Signal voltage amplitude: 5V TTL equivalent
Output impedance: 75Ω ±10%
Output frequency (WORD):
44.1 / 48 / 88.2 / 96 / 176.4 / 192kHz
Frequency stability ±10 ppm or less (Ta = 20º C)
OUT/THRU switch included (OUT is only for WORD OUT)
ETHERNET
Connector: RJ45
Compatibility: 100BASE-TX, 1000BASE-T
KEYBOARD
Connector: Mini-DIN (PS/2)
USB
Connector: USB A-type 4-pin
Protocol: USB2.0 HIGH SPEED (480 Mbps) compliant
REMOTE
Connector: RJ45
Supply voltage: 13 V
Signal: LVDS serial
Transmission contents:
LCD display DATA, asynchronous serial transmission
control signals, port control signals
17–Specifications
129


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-2 in the language / languages: English as an attachment in your email.

The manual is 4,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info