Manual Tascam HS-2 (page 82 of 132) (English)

617907

Zoom out

Zoom in

1/132

82 TASCAM HS-2

Editing the playback starting time/ending

point

1 Press the HOME key on the front panel to open the

HOME screen.

2 Touch a file name or title name button display and

then touch the

ADJUST ENTRY

button on the pull-

down menu to open the

ADJUST XXX

screen. (“

XXX

”

is the entry number.)

NOTE

You can also open this screen by touching the

button and then touching the

ADJUST

button on the

pull-up menu when a take is selected on the

ENTRY

list

screen or one of the key assign buttons on the left is

selected on the

ASSIGN

file screen.

3 Displays the

Start End Point

tab screen.

4 When you touch the time display digits, its back-

ground is highlighted in yellow and the applicable

cursor starts blinking.

You can change the Start / End points using the

DATA dial when the time display digits have been

selected.

Changing the selected digit past its natural limit

will increment or decrement the next higher digit.

5 You can select the digit according to the resolu-

tion power you want to change. When changing

it by frame precision, select the frame digit. When

changing it by sampling accuracy, select the sam-

pling digit. You can capture the current playback

point to the Start / End point using the

CURRENT

button.

NOTE

•

Touch the

CURRENT

button to capture the current

playback position as the Start/End point.

•

Touch the

RESET

button to display a pop-up window

asking you to reset the Start/End Point to the

beginning/ending time of the file. Touch the

button

on the pop-up window to reset the Start/End Point to

the beginning/ending time of the file.

Editing the playback starting time/ending

point using the number buttons/mark list

screen

1 When you touch the

EDIT

button, the

EDIT START

POINT

screen/

EDIT END POINT

screen for editing

the playback start / end point are shown.

Use the

FRAME EDIT

button on the

EDIT START

POINT

screen to set whether or not you will edit the

frame value.

2 Use the number buttons to input the playback

start/ end point.

•

If you begin input without selecting a digit, input

will start from the smallest one.

•

To input a specific digit, touch it to make its

background yellow, and then use the number

buttons or the DATA dial to enter two digits at a

time.

•

Touch the

CURRENT

b button to copy the current

playback position to the input value.

•

Touch the

SET MAX

5 button to set the end time

on the file to the input value.

•

Touch the

CLEAR

button to erase all entered values.

•

Touch the

Mark List

button to open the mark list

screen where you can copy the time from a desig-

nated mark.

On this screen, touch the e button of a mark to to

copy its time to the playback start / end point and

return to the

ADJUST ENTRY XXX

screen.

NOTE

When you change the playback start / end time, the

setting value of the playback start / end time will be

controlled automatically for the length of the playback

start / end time to become longer than the total of

lengths for fade-in/ fade-out.

9–Playlist mode

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-2 in the language / languages: English as an attachment in your email.

The manual is 4,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tascam HS-2 Manual

Product: