617907
53
Zoom out
Zoom in
Previous page
1/132
Next page
TASCAM HS-2 53
Editing the timeline
You can cut, erase and divide regions.
1 Press the HOME key to open the Home Screen.
2 Touch the
EDIT MODE
button to enter edit mode.
The
EDIT MODE
button becomes white with red
lettering, and the
REC/MON
,
Bounce I/O
and
NEXT
TAKE NAME
buttons disappears and are replaced
with the
EDIT
button,
Fade/Level
button, and
SET/
SELECT
button.
3 Touch the
EDIT
button to open a pull-up menu.
The pull-up menu includes not only nine editing
buttons such as
Copy
,
Cut
,
Erase
,
Divide
,
Insert
,
Insert File
,
Insert Mute
,
Paste
,
Paste File
,
but also buttons used for editing such as
UNDO
and
REDO
buttons.
CAUTION
If you do not save the AES31 editing information after
editing it, all changes will be cleared when you load
another project/session/AES31 editing information,
remove a card or turn off the unit’s power, for example.
NOTE
Repeated recordings or editing may greatly consume the
memory used in managing regions or editing history.
In this case, the pop-up message
Cannot Edit.
System limit reached.
appears:
Selecting the range to copy/cut/delete
When the editing start and finish points are designated,
the range between the points is selected.
When the editing start and finish points are not
designated, the entire region under the time cursor is
selected.
[When the editing points are not designated]
When the timeline cursor is on the borderline of the
region, the region to the right is to be edited. If the
region to the right is the muted part, it is not selected.
Designating the editing start point
1 Press the HOME key to display the Home Screen.
2
Touch the
EDIT MODE
button to enter the edit mode.
3 Use the m/,, keys etc. to locate the timeline
cursor on the position (time) to start editing.
4 Touch the
SET/SELECT
button to display the pull-
up menu.
5 Touch the
SET IN
button on the pull-up menu item
to set the editing start point (IN point)
IN mark (
) will be displayed in the current position
marking area.
7–Timeline mode
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-2 in the language / languages: English as an attachment in your email.

The manual is 4,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info