617907
48
Zoom out
Zoom in
Previous page
1/132
Next page
48 TASCAM HS-2
Playback in timeline mode
Project/session selection
1 Press the PROJECT key on the front panel to open
the
PROJECT
screen.
2 Touch the e button next to the project that you
want to play to open the session selection screen.
If it is not the current project, a pop-up window
appears confirming that you want to load it. Touch the
OK
button.
3 Touch a session name button to select that session.
4 Touch the
MENU
button to open a pull-up menu and
touch the
LOAD
button.
The
Load selected Session?
pop-up appears.
5 Touch the
OK
button.
When loading completes, the Home Screen opens.
Setting input monitoring
Turn input monitoring OFF when you are playing back. If
input monitoring is ON, sound from the input connectors
will be output through all the output connectors of this
unit.
1 Touch the
INPUT MONITOR
button on the Home
Screen to open a pull-up with the input monitoring
ON
/
OFF
button.
2 If input monitoring is on (
ON
button appears blue),
touch the
OFF
button to turn it off (
OFF
button ap-
pears blue).
Locate to the playback start position
Use the m [ ] and , [ ] keys, jump to a mark
or use the manual locate function to locate to the time
where you want to start playback
When time code synchronization is ON, playback will
occur at the input time code, so locating as described
above is not necessary.
Playback control in timeline mode
Press the PLAY key to start playback.
Press the PAUSE key to pause playback.
Press the PLAY key again to resume playback.
Press the STOP (RETAKE) key to stop playback.
Press the . [MARK .] key or / [MARK /] key
to skip to the start of another region.
Press and hold the m [ ] or , [ ] key to
search backward or forward.
Press the . [MARK .] or / [MARK /] key while
pressing and holding the SHIFT key to move between
marks.
Press and hold the m [ ] or , [ ] key while
pressing and holding the SHIFT key to search at high-
speed.
While pressing and holding the STOP key, press the
. [MARK .] or / [MARK /] key to skip to the
beginning of the first region recorded or the end of the
last region. (This only works with the front panel keys.)
NOTE
Playback functions can also be used through parallel
control.
Using the call function
Press the CALL (CHASE) key to locate to the point where
playback was last started from playback standby (call
point) and put the unit in playback standby mode.
7–Timeline mode
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-2 in the language / languages: English as an attachment in your email.

The manual is 4,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info