617907

Tascam HS-2 Manual

37
Zoom out
Zoom in
Previous page
1/132
Next page
TASCAM HS-2 37
•
CREATE PLAYLIST button
This shows the screen for creating a new playlist.
•
MENU button
Touch to open a pull-up menu where you can select
LOAD
,
EDIT NAME
and
DELETE
.
•
Scroll buttons
Use these buttons to scroll to the beginning or end of
the playlist or scroll one page (five lines) forward or
backward. You can also scroll through the playlist one
line at a time using the DATA dial.
Project operations
Creating new projects
1 Press the PROJECT key on the front panel to open
the
PROJECT
screen.
2 Touch the
CREATE PROJECT
button on the
PROJECT
screen to open the
CREATE PROJECT
screen.
This screen has three pages.
CREATE PROJECT screen 1
You can make the following settings on this screen.
8
Project Name
Touch the
Project Name
button to open the
screen where you can edit the project name.
The maximum number of characters for project and
session names is 31. Extra characters are discarded.
8
Session Name
Touch the
Session Name
button to open the
1st
Session
screen where you can change the name of
the first session.
On the
1st Session
screen, the maximum
number of characters allowed is indicated by a
yellow background.
8
Fs
Set that sampling frequency of the project.
8
NEXT button
Touch to open the next page.
8
CREATE PROJECT button
Touch this to create a project with the current
settings. If a project with the same name already
exists, this button appears gray and you will not be
able to create a new project.
3 After you complete making settings, touch the
NEXT
button.
CREATE PROJECT screen 2
You can make the following settings on this screen.
8
Frame Type
Set the time code frame type.
8
Bit Length
Set the bit length used during recording.
8
PREV button
Open the previous screen.
4 After you complete making settings, touch the
NEXT
button.
CREATE PROJECT screen 3
You can make the following settings on this screen.
8
TIMELINE START TIME
Set the starting time used in timeline mode. Touch
the
EDIT
button to open a screen where you can
change the starting time.
8
OTHERS
Touch the
Current Setting
button to use the
current settings of other parameters when creating
the project or touch
Factory Preset
to use the
default settings.
5 After you complete making settings touch the
CREATE PROJECT
button.
NOTE
•
If a project with the same project name already exists,
the
CREATE PROJECT
button appears gray and you
will not be able to create a new project. If this happens,
change the project name.
•
On screens 2 and 3, touch the
PREV
button to return to
the previous screen.
5–Projects
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-2 in the language / languages: English as an attachment in your email.

The manual is 4,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info