617907
12
Zoom out
Zoom in
Previous page
1/132
Next page
12 TASCAM HS-2
9 STOP [RETAKE] key
Press to stop recording or playback.
Press this while pressing and holding the SHIFT key to
retake the recording (erasing the last recorded take).
0 PLAY key/indicator
When stopped or in playback standby, press this key
to start playback. This key lights during playback.
Press this key when in recording standby to start
recording.
Both the PLAY and REC keys light during recording.
In timeline mode, press the PLAY key while pressing
and holding the REC key to start recording from that
point.
Both the PLAY and REC keys light during recording.
q PAUSE key/indicator
Press this key when stopped or during playback to put
the unit in playback standby. This key lights when in
standby.
Press this key while recording to put the unit in
recording standby. Both the PAUSE and REC keys light
when in recording standby.
w REC key/indicator
When a recordable card is installed and the unit is
stopped, press this key to put the unit into recording
standby. Both the PAUSE and REC keys light during
recording standby.
In timeline mode, press the PLAY key while pressing
and holding the REC key to start recording from
that point. Both the PLAY and REC keys light during
recording.
e PHONES knob/jack
Connect stereo headphones to this standard stereo
phone jack.
This jack outputs the signal from the internal
monitoring mixer.
Use the PHONES knob to adjust the headphones
output level.
CAUTION
Before connecting headphones, turn the PHONES knob
to the minimum volume. Failure to do so could cause
sudden loud noises to occur, which might damage your
hearing or equipment.
r KEYBOARD connector
Connect an IBM PC-compatible keyboard with a PS/2
interface here, and use it to input project and session
names, for example.
By default, the unit is set to use Japanese keyboards,
which have a different layout from US keyboards.
To use a US keyboard, change the setting on the
PREFERENCES
page of the
SYSTEM SETUP
screen. (See
“PREFERENCES page on page 102.)
t PROJECT key
Press to open screens related to projects (
PROJECT
selection,
SESSION
selection,
AES31
file selection,
TAKE
selection and
PLAYLIST
selection screens). The
last used project-related screen opens.
(See “PROJECT screen on page 34.)
y EXIT/CANCEL (PEAK CLEAR) key
Press to cancel input or item selection.
When a pull-up or pull-down menu is open, press to
close it.
On the Home Screen, when no pull-up/pull-down
menu is open, this key functions as a reset button for
peak hold marks shown on the level meters
When the
MENU
screen or project screen is open, press
this to return to the Home Screen.
On other screens, press this to return to the previous
screen.
When a pop-up window is open, press this to cancel
an operation.
u CALL [CHASE] key
Press to locate to and pause playback at the call point,
which is where playback last started from playback
standby.
Press this key while pressing and holding the SHIFT
key to turn synchronization with timecode ON/OFF.
i LCD TILT button
Press this button to unlock the color display, so that
you can adjust its angle by pulling the bottom of the
display outward.
To put the display away, press this button to unlock it
and push the bottom inward.
o m [ ] and , [ ] keys (search)
Press one of these keys to search.
m [ ] key: search backward
, [ ] key: search forward
Press one of these keys while pressing and holding the
SHIFT key to search at high speed.
p .// [MARK .//] keys (skip)
Use these keys to skip between regions, takes and
entries.
Press these keys while pressing and holding the SHIFT
key to move to the previous/next mark. After moving,
the same playback state resumes (stopped/playback
standby/playback).
a MARK key
Press this key to add a mark at the currently located
time.
The maximum number of marks, including automatic
marks, possible in a single timeline/take is 99. (See
“Mark functions” on page 109.)
2−Names and functions of parts
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-2 in the language / languages: English as an attachment in your email.

The manual is 4,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info