490765
49
Zoom out
Zoom in
Previous page
1/60
Next page
TASCAM DR-100MKII
49
8 – Settings and Information
Battery information page (BATTERY)
On the
BATTERY
page, usage information about the
batteries in the recorder is shown.
Li-Ion:
Shows the amount of power remaining in the recorder’s
lithium-ion rechargeable battery.
The number to the right of the icon shows whether this
is being used as the main (
1
) or secondary (
2
) battery power
source.
AA:
Shows the amount of power remaining in the recorder’s
AA batteries. The number to the right of the icon shows
whether this is being used as the main (
1
) or secondary (
2
)
battery power source.
ALKALI
or
Ni- M H
shows the type of AA batteries in the
recorder.
Alkaline batteries:
ALKALI
Ni-MH batteries:
Ni- M H
NOTE
When using an AC adaptor or TASCAM BP-6AA external
battery pack, the icon is always shown instead of
the remaining charge in the lithium-ion rechargeable
battery.
When the lithium-on battery is set as the main battery
and is in use, the remaining charge of the AA batteries
might not be shown correctly depending on other
conditions. (See “Setting the main battery source (MAIN)”
on page 50.)
Operation settings (SETUP)
On the
SETUP
screen, you can make various settings
to make the unit easier to operate according to the
environment where you are using it and other conditions.
On this screen you can also initialize the unit and format SD
cards.
Follow these procedures to open the
SETUP
screen.
1 Press the MENU button to open the
MENU
screen.
2 Use the wheel to select the
SETUP
menu and press
the ENTER/MARK button to open the
SETUP
menu
screen.
Use the items on the
SETUP
screen to make the
following settings.
Use the . and / buttons and the wheel to set each
item.
Search speed setting
CUE/REV SPD
sets the forward and backward search speed
used when you press and hold the .// buttons.
Setting options:
X2
,
X4
,
X8
(default),
X10
Automatic power OFF setting
AUTO OFF
sets the amount of time until the recorder turns
OFF automatically after the last action or operation when
running on battery power.
Setting options:
OFF
(default, does not turn off
automatically),
3min
,
5min
,
10min
,
30min
Automatic backlight OFF setting
BACKLIGHT
sets the amount of time until the backlight
turns OFF automatically after the last operation when
running on battery power.
Setting options:
OFF
(always unlit),
5sec
(default),
10sec
,
15sec
,
30sec
,
ALWAYS
(always lit)
Display contrast setting
CONTRAST
sets the display contrast.
Setting range:
1
20
(default value:
6
)
Backlight brightness setting
DIMMER
sets the backlight brightness.
Setting options:
HIGH
(default),
LOW
Restoring default settings
Use the
INITIALIZE
item if you want to restore the various
settings of this device to their factory defaults.
1 Use the wheel to select
INITIALIZE
and press the
ENTER/MARK button to select
Exec
.
2 Press the ENTER/MARK button again to open a
confirmation popup message.
3 Press the ENTER/MARK button again to initialize
the recorder. Press the STOP [8] button to cancel
initialization.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DR100 MKII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DR100 MKII in the language / languages: English as an attachment in your email.

The manual is 5,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tascam DR100 MKII

Tascam DR100 MKII User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info