490765
45
Zoom out
Zoom in
Previous page
1/60
Next page
TASCAM DR-100MKII
45
Using the wheel to change the playback
position
When the Home Screen is open and a track is playing back
or stopped, you can use the wheel to change the playback
position.
NOTE
The faster you turn the wheel, the more rapidly the
position changes.
No sound is output while the wheel is being turned.
During playback, if you turn the wheel, playback will
resume from the position where you stop turning.
Repeat playback (REPEAT)
You can repeatedly playback one le or multiple les within
a designated area.
1 Press the MENU button to open the
MENU
screen.
2 Use the wheel to select
PLAY MODE
and press the
ENTER/MARK button.
PLAY MODE
screen appears.
3 Use the wheel to select
REPEAT
and press the / or
ENTER/MARK button.
4 Use the wheel to select a repeat mode.
OFF (default)
All files in the playback area are played in sequence one
time. (This setting is the ordinary playback mode.)
SINGLE
The selected file is played once without repeating. The
icon appears on the Home Screen
1 REPEAT
The current file is played repeatedly. The icon
appears on the Home Screen.
ALL REPEAT
All files in the selected playback area are played back
repeatedly. The icon appears on the Home Screen.
NOTE
If you start loop playback, the
REPEAT
item automatically
switches to
OFF
if it is in a dierent mode.
5 After completing the setting, press the STOP [8]
button to return to the Home Screen and start
playback.
Loop playback
With this function, you can continuously repeat (loop) the
playback of a selection that you make.
1 During playback (or when paused), press the I/O
LOOP button at the point where you want to start
the loop playback interval.
The current playback position will be set as the starting
(IN) point.
2 Press the I/O LOOP button at the point where you
want to end the loop playback interval.
The current playback position will be set as the ending
(OUT) point, and loop playback between the IN-OUT
points will start. The starting (IN) and ending (OUT)
points are shown as and at corresponding positions
beneath the playback position bar on the Home Screen.
In addition, the icon also appears during playback.
NOTE
The pop-up message of
I/O Too Short
appears if the
section between the IN and OUT points is too short. Set
them again. The section should be 1 second or longer.
When the starting (IN) and ending (OUT) points are
currently set, pressing the I/O LOOP button again will
clear both points.
You cannot set the IN and OUT points in different files.
If you enable repeat playback, the loop settings will be
cleared.
IN and OUT point settings are lost when you select a
different file.
Setting accurate IN and OUT points might not be
possible with Variable Bit Rate (VBR) format MP3 files.
Special playback control functions
Not only can you use the DR-100MKII to change the tempo
of track playback, you can even do this without changing
the pitch.
Setting the playback control functions
Use the
PB CONTROL
Screen to set the playback control
functions. When the Home Screen is displayed, press and
hold the PB CONTROL button to open the
PB CONTROL
Screen.
6 – Playback
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DR100 MKII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DR100 MKII in the language / languages: English as an attachment in your email.

The manual is 5,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tascam DR100 MKII

Tascam DR100 MKII User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info