490765
17
Zoom out
Zoom in
Previous page
1/60
Next page
TASCAM DR-100MKII
17
r
Loop playback IN (starting) and OUT (ending)
points
The settings of loop playback starting (IN) and ending
(OUT) points are shown. When the starting (IN) point
is set, the icon appears below the corresponding
position on the playback position bar.
When the ending (OUT) point is set, the icon
appears below the corresponding position on the
playback position bar
t
Playback file number/total number of files
The total number of les in the playback area and the
number of the current le are shown.
y
Monitoring output
Depending on the status, one of the following icons
appears.
Sound output from the headphone jack
Sound output from the speaker
Recording screen
1 Stereo/mono setting
When recording with mics, this icon shows whether
recording is in stereo or mono.
Stereo
Mono
2
Prerecording setting
The icon appears when the prerecording function
is ON” and the unit is in recording standby.
3
Low-cut filter ON/OFF setting
This icon shows whether the low-cut lter is ON or OFF.
When set to
40Hz
,
80Hz
or
120Hz
, the icon appears as
light letters on a dark background.
OFF
40 Hz low-cut lter ON
80 Hz low-cut lter ON
120 Hz low-cut lter ON
4
Auto gain control/limiter setting
Auto gain control OFF
Auto gain control ON
Limiter OFF
Limiter ON
5 Elapsed/remaining recording time
This shows the elapsed time of the le being recorded
or the remaining time (hours: minutes: seconds)
according to the set maximum le size. If the remaining
time available on the SD card is less, however, that will
be shown instead.
When in recording standby or recording, press the
HOME button to switch between the elapsed recording
time and the remaining recording time. When the
remaining recording time is shown, a “–” appears
before it.
6 Recorder operation status
This icon shows the recorder operation status.
Icon Meaning
8
Recording standby
9
Recording paused
0
Currently recording
7
Level meters
These show the levels of the input signals. When
overdubbing is on, the levels of the combined input
and playback signals are shown. On the scale, the b
mark indicates a level of −16 dB to help you adjust the
analog input level.
8
File name
This shows the le name that will automatically be
given to the le being recorded.
9
Input signal setting
This icon shows the signal being input.
XLR (MIC/LINE 1) IN L/R
UNI MIC L/R (directional)
OMNI MIC L/R (omnidirectional)
LINE 2 IN L/R
0 SD card remaining recording time
This shows the remaining recording time (hours:
minutes: seconds) on the SD card in the recorder.
q
Peak value in decibels (dB)
The peak recording level is shown in decibels.
w Recording file type/bit length/sampling frequency
This shows the format, bit length and sampling
frequency of the le being recorded.
2 – Names and Functions of Parts
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DR100 MKII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DR100 MKII in the language / languages: English as an attachment in your email.

The manual is 5,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tascam DR100 MKII

Tascam DR100 MKII User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info