490765
7
Zoom out
Zoom in
Previous page
1/60
Next page
TASCAM DR-100MKII
7
Quick Start Guide
In this section, we explain how to use this unit to record
with the built-in mics (UNI MIC) and how to play back a
recording.
The unit contains a factory-installed SD card, and will by
default produce 44.1 kHz, 16-bit WAV les.
Higher-quality or longer les can be produced using other
recording settings. See “Selecting file format, sampling
frequency, and maximum file size for details on page 27.
1 Insert the included TASCAM BP-L2 lithium ion
battery into the battery compartment on the side of
the recorder. Orient the battery so that it fits in the
battery compartment.
NOTE
When the product is purchased new, the included TASCAM
BP-L2 lithium ion battery has not been charged suciently
for the operation of the recorder. Charge the battery before
using the unit by connecting it with a computer by USB.
(See “Using the lithium ion battery on page 20.)
2 Turn on, and various setting information will be
displayed.
Press the
button on the left side panel until the
unit is turned on, and then release it.
NOTE
After purchasing the recorder, the rst time you turn the
power ON, the
DATE/TIME
screen will open in order to
enable it to accurately add date and time information to
recorded les.
Press the . or / button to move the cursor
(highlighted portion), and adjust the date and time using
the wheel. Then press the ENTER/MARK button to set. (See
“Setting the date and time on page 23.)
3 Set the INPUT switch to UNI.
4 Press the RECORD [0] button to switch to recording
standby. The indicator will flash.
RECORD button/
indicator
5 Use the INPUT knob on the right side panel to adjust
the analog input level. See Adjusting the analog
input level” on page 31 for details.
6 Press the RECORD [0] button to start recording. The
indicator will light during recording.
7 Press the STOP [8] button to finish recording.
NOTE
To pause recording, press the RECORD [0] or PLAY/
PAUSE [7/9] button. Press the RECORD [0] or PLAY/
PAUSE [7/9] button again to restart recording in the
same le.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DR100 MKII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DR100 MKII in the language / languages: English as an attachment in your email.

The manual is 5,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tascam DR100 MKII

Tascam DR100 MKII User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info