617909
48
Zoom out
Zoom in
Previous page
1/60
Next page
48
TASCAM DR-680MKII
9 – Other Settings and Information Display
GANG function
The GANG function allows you to adjust multiple channels
at the same time on the
TRIM
,
PAN
and
LEVEL
screens.
Set the range of channels to be ganged by pressing the
channel number (1–6) buttons for the channels at both
ends of the range at the same time.
For example, to gang channels 3–5, press the 3 and 5
buttons at the same time. When you do so, channels
3
-
5
will appear selected on the screen as shown in the
illustration below.
You can create multiple gangs of channels by setting each
gang separately. However, no channel can be part of more
than one gang.
When ganged, you can adjust parameters for the ganged
channels at the same time.
If the parameter setting for any of the ganged channels
reaches its maximum or minimum value, turning the
VALUE/MARK knob in the same direction will not further
increase or decrease the other channel parameters.
If you press and hold the VALUE/MARK knob while
multiple channels are selected, the parameter values for all
of the ganged channels will be set to the lowest value of
the channels.
Any of the following actions will deactivate the GANG
function.
Press any button that corresponds to a channel that is
currently ganged.
Put the unit power in standby.
Activate or Deactivate MS decoding.
Use the INITIALIZE function.
When using the GANG function, the ganged channels are
the same on the
TRIM
,
PAN
and
LEVEL
screens. However,
channels that have been set to use mid-side decoding
cannot be ganged or unganged on the
PAN
and
LEVEL
screens.
NOTE
You cannot gang channels that are set to use MS
decoding with channels that are not. However, you can
gang such channels separately.
You cannot gang channels that are set to use different
types of MS decoding.
When designating a range that includes multiple
channel pairs set to use MS decoding, only the
channels in the pair with the lowest number is ganged.
If only one of the channels in a pair set to use MS
decoding is included in the range, none of the channels
will be ganged together.
When dual recording is enabled, the GANG function
cannot be used. (See “Enabling dual recording” on
page 31.)
Output settings
You can make settings related to analog and digital output.
Analog output settings
You can set the LINE OUTPUT jacks to directly output the
sound of each track or to output the stereo mix sound.
When set to output the MIX, the left and right channels of
the stereo track are output through the analog output jack
1/2, 3/4 and 5/6 pairs.
1. Press the MENU button to open the
I/O
page of the
MENU
screen.
2. Use the DATA wheel to select the
LINE OUT
menu
item, and press the ENTER/MARK button.
3. Use the DATA wheel to set it to
1- 6
(default value) or
MIX x3
.
1- 6
: The sound of each channel is output directly.
MIX x3
: The stereo signal mixed by the internal mixer
is output.
4. When you have finished making the setting, press the
HOME/DISP button to return to the Home Screen.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DR-680MKII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DR-680MKII in the language / languages: English as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info