617909
33
Zoom out
Zoom in
Previous page
1/60
Next page
TASCAM DR-680
33
4 – Recording
Automatically cutting unnecessary
silences when recording (silent cut
function)
When recording, the unit can pause when it detects silence
for a certain amount of time, and then restart recording
when it detects an input signal again. Since this cuts
unnecessary silence during recording, space on the card
can be conserved.
1. Set the
A.R E C
item on the Function Screen and
the
LEVEL
item on the
AUTO REC
menu page as
described above.
2. Use the DATA wheel to select the
SILENT
CUT
item,
and press the ENTER/MARK button.
3. Use the DATA wheel to set it to
ON
(default value:
OFF
).
4. Press the MARK (Â) button to return to selecting
items.
5. Use the DATA wheel to select the
SILENT
DELAY
item,
and press the MARK (¯) button.
6. Use the DATA wheel to set the silence that must be
detected before recording is paused between 1–5
seconds (default value: 1 seconds).
7. When you have finished making the settings, press the
HOME/DISP button to return to the Home Screen.
8. Press the PAUSE button to start recording standby.
When the input sound exceeds the level set in the
LEVEL
item, recording starts automatically.
When the input sound level is below the level set in
the
LEVEL
item for a set number of seconds, recording
automatically pauses.
When the input sound exceeds the level set in the
LEVEL
item again, recording restarts automatically.
Automatically adding marks at the
position where recording restarts
You can set whether a mark is added or a new take is
created whenever input higher than the set auto rec level
is detected after the input level has been below the auto
rec level for one second or more.
1. Set the
A.R E C
item on the Function Screen and
the
LEVEL
item on the
AUTO REC
menu page as
described above.
2. Use the DATA wheel to select the
AUTO
MARK
item, and
press the ENTER/MARK button.
3. Use the DATA wheel to set it to
MARK
or
TAKE
.
OFF
(default): Auto mark function off
MARK
: After the input level has been below the set
auto rec level for one second or more, when input
higher than the auto rec level is detected again, a mark
is added at that position. Recording continues in the
same take.
TAKE
: After the input level has been below the set auto
rec level for one second or more, when input higher
than the auto rec level is detected again, recording
continues in a new take. After pausing because of
activation of the silent cut function, recording restarts
in a new take.
4. When you have finished making the settings, press the
HOME/DISP button to return to the Home Screen.
5. Press the PAUSE button to start recording standby.
Depending on the setting, a mark is added or a new
take is created when recording starts automatically.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DR-680MKII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DR-680MKII in the language / languages: English as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info