617908

Tascam DR-60DMKII Manual

15
Zoom out
Zoom in
Previous page
1/152
Next page
TASCAM DR-60DMKII
15
About recording standby
This unit has a recording standby function like that of
a professional recorder. In recording standby mode,
you can adjust the input level, for example, and then
start recording quickly.
When in recording standby, the REC indicator blinks
and the recording screen appears.
Menu structure
You can make various settings with the
REC
SETTING
item on the
MENU
screen.
REC SETTING
FORMAT Set the file format
BWF: 16/24-bit,
WAV: 16/24-bit
SAMPLE Set the sampling frequency
44.1kHz, 48kHz, 96kHz
SIZE Set the maximum file size
64MB, 128MB, 256MB,
512MB, 1GB, 2GB
SELF TMR Set the self timer function
OFF, 2sec, 10sec
MONITOR Enabling monitoring
OFF, ON
Adjusting the input level
1.
Press the MENU button to open the
MENU
screen.
2.
Turn the DATA dial to select
INPUT SETTING
,
and press the DATA dial or / button to
open the
INPUT SETTING
screen.
INPUT SETTING
screen appears.
3.
Turn the DATA dial to set the
GAIN
for each
channel, and press the DATA dial or /
button.
Ch1 INPUT SETTING
screen
4.
Turn the DATA dial to set the mic input gain.
Options:
MUTE
,
LOW
(default value),
MID
,
HIGH
,
HI+PLUS
5.
When finished making the setting, press the
stop (8) [HOME] button to return to the
Home Screen.
6.
Press the record (0) button to begin recording
standby.
The record indicator flashes red and the
recording screen appears.
7.
Use the 1/L, 2/R and 3-4 knobs on the front of
the unit to adjust the input levels.
If the input levels are too high, the peak
indicators to the left of the 1/L, 2/R and 3-4
knobs light red.
A b mark is provided at -12dB on the level
meters. Set the input level so that the indicator
bars move to and fro with this mark at about
the center without causing the 1/L knob, 2/
R knob, 3-4 knob PEAK indicator to light red
when the loudest sounds occur.
8.
When finished making the setting, press the
stop (8) [HOME] button to exit recording
standby.
Using the limiter
When the limiter is on, the mic input gain will be
adjusted automatically according to the input level
to set the recording level so that distortion does not
occur even when loud sounds are input.
1.
Press the MENU button to open the
MENU
screen.
2.
Turn the DATA dial to select
INPUT SETTING
,
and press the DATA dial or / button to
open the
INPUT SETTING
screen.
INPUT SETTING
screen appears.
3.
Turn the DATA dial to select
LIMITER
for
a channel, and press the DATA dial or /
button.
Ch1 INPUT SETTING
screen
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DR-60DMKII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DR-60DMKII in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 4,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info